Effects of Slider Mass, Contact Stiffness and Contact Damping on Contact Force of a Single-DOF Contact Slider Model.
نویسندگان
چکیده
منابع مشابه
Effect of Contact Pressure and Frequency on Contact Heat Transfer Between Exhaust Valve and its Seat
The hot gases produced by the internal combustion engines passes through the exhaust valve and causes high temperatures in the exhaust valve and its seat. To avoid damaging the exhaust valve, heat must be transferred from the valve to its seat during the contact they make at the opening and closing cycle. Heat transfer rate from the exhaust valve to its seat is a function of many factors. One o...
متن کاملEffect of contact conditions during thermo-mechanical contact between a thermal flying height control slider and a disk asperity
A three-dimensional thermo-mechanical model is developed for the transient contact between a thermal flying height control (TFC) slider and a disk asperity. The effect of contact conditions is investigated, including the friction coefficient and the circumferential disk velocity. The damage of the read–write shields due to contacts with disk asperities is studied along with the maximum temperat...
متن کاملMeasurement and Modeling of Normal Contact Stiffness and Contact Damping at the Meso Scale
Modeling of contact interfaces that inherently include roughness such as joints, clamping devices, and robotic contacts, is very important in many engineering applications. Accurate modeling of such devices requires knowledge of contact parameters such as contact stiffness and contact damping, which are not readily available. In this paper, an experimental method based on contact resonance is d...
متن کاملSliding Friction Contact Stiffness Model of Involute Arc Cylindrical Gear Based on Fractal Theory
Gear’s normal contact stiffness played an important role in the mechanical equipment. In this paper, the M-B fractal model is modified and the contact surface coefficient is put forward to set up the fractal model, considering the influence of friction, which could be used to calculate accurately the involute arc cylindrical gears’ normal contact stiffness based on the fractal theory and Hertz ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
سال: 1998
ISSN: 0387-5024,1884-8354
DOI: 10.1299/kikaic.64.2894