Effects of SiC Fibers and Laminated Structure on Mechanical Properties of Ti–Al Laminated Composites
نویسندگان
چکیده
منابع مشابه
Mechanical Properties of Angle Ply Laminated Composites- A Review
The purpose of this study is to review many of the available guidelines for Polymer composite materials. Guide lines for failure mode, laminates orientation, winding angle, water absorption, as they strongly influence the mechanical properties of composite materials. The present review is focused on composite laminates made of glass, carbon, graphite, hybrid and natural fiber composites, since ...
متن کاملSynthesis and characterization of laminated Si/SiC composites
Laminated Si/SiC ceramics were synthesized from porous preforms of biogenous carbon impregnated with Si slurry at a temperature of 1500 °C for 2 h. Due to the capillarity infiltration with Si, both intrinsic micro- and macrostructure in the carbon preform were retained within the final ceramics. The SEM micrographs indicate that the final material exhibits a distinguished laminar structure with...
متن کاملAluminum-laminated Panels: Physical and Mechanical Properties
Aluminum lamination was performed to improve the physical and mechanical properties of several wood-based composite panels. The panels were aluminum-laminated on two faces in a hot press at 689 kPa and 120 °C for 6 min. Four types of wood-based composites were used as cores, and aluminum 3003 alloy sheets were used for face laminations. Polyurethane adhesive ensured bonding strength between the...
متن کاملdetermination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولBolted Joints in Laminated Composites
Expressions were presented which can be used to estimate the strengths of continuous fiber reinforced composite laminates containing pin-loaded holes. The expressions apply to laminates containing either a single pin loaded hole, a single row of pin loaded holes, or two parallel rows of pin loaded holes.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2021
ISSN: 1996-1944
DOI: 10.3390/ma14061323