Effects of Pulse Plating on Zn-Ni Alloy Electrodeposition Behavior.
نویسندگان
چکیده
منابع مشابه
A Novel Electrodeposition Process for Plating Zn-Ni-Cd Alloys
Zn-Ni-Cd alloy was electrodeposited from an alkaline electrolytic bath under potentiostatic conditions. Bath analyses using a pH concentration diagram reveal that addition of a complexing agent is essential to maintain the bath stability. Introduction of a low concentration of CdSO4 reduces the anomalous nature of the Zn-Ni deposit. Deposits obtained from the electrolytic bath which contains 60...
متن کاملPulse Reverse Electrodeposition of Spherical Ni-MWCNT Composite Skein
Watt’s bath and pulse reverse (PR) electrodeposition is used to produce spherical nickelmultiwall carbon nanotubes (Ni-MWCNT) of 2.00, 0.93, 1.63 and 6.71 μm diameter and a variety ofsize distributions. For 60 cycles, an absolute electrodeposition current of 18 A/dm2 is applied atcurrent ratios of ii = idissolution/ideposition = 0, 0.077, 0.200 and 0.368. A simple exponential equation isfitted ...
متن کاملEffects of Pretreatment Prior to Electroless Ni-P Plating on Fatigue Behavior of SAE 1045 Steel
Electroless Ni-P (EN) plating, as an important group of metallic coatings, employed in a wide range of industrial applications. The current work aims to investigate the effects of pretreatment process before EN plating on fatigue behavior of SAE 1045 steel. The specimens of rotating bending fatigue test were prepared from the steel in two series. A group of samples used in as-polished con...
متن کاملDevelopment of a New Electrodeposition Process for Plating of Zn-Ni-X (X5Cd, P) Alloys I. Corrosion Characteristics of Zn-Ni-Cd Ternary Alloys
A new Zn-Ni-Cd plating process was developed which offers a unique way of controlling and optimizing the Ni and Cd contents in the final deposit. Zinc-nickel-cadmium alloy was deposited from a 0.5 M NiSO4 1 0.2 M ZnSO4 bath in the presence of 0.015 M CdSO4 and 1 g/L nonyl phenyl polyethylene oxide. Using this process a Zn-Ni-Cd ternary alloy, with a higher nickel content as compared to that obt...
متن کاملDevelopment of a New Electrodeposition Process for Plating of Zn-Ni-X (X = Cd, P) Alloys - Permeation Characteristics of Zn-Ni-Cd Ternary Alloys
It is shown that an electrodeposited Zn-Ni-Cd alloy coating produced from sulfate electrolyte inhibits the discharge of hydrogen on carbon steel. The newly developed ternary alloys have approximately ten times higher corrosion resistance when compared to a Zn-Ni alloy. Hydrogen permeation characteristics of Zn-Ni-Cd alloy coatings were studied and compared with those of a bare and a Zn-Ni alloy...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Surface Finishing Society of Japan
سال: 1991
ISSN: 0915-1869,1884-3409
DOI: 10.4139/sfj.42.627