Effects of Polyurethane Substrate Pre-Treatment on Pulsed Cathodic Arc Deposited DLC Films
نویسندگان
چکیده
منابع مشابه
Evaluation of tribological properties of (Ti,Al)CN/DLC composite coatings deposited by cathodic arc method.
In this study, Ti, Al and N doped DLC – referred to here after as “(Ti,Al)CN/DLC composite”- coating and pure diamond-like coating (DLC) were produced by cathodic arc deposition technique and the effects of the coating thickness on their tribological properties were evaluated. The coatings were characterized, using scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffrac...
متن کاملMacroparticles in films deposited by steered cathodic arc
The macroparticle content of titanium films deposited using a steered vacuum cathodic arc has been investigated. It has been found that the macroparticle number decreases with increasing steering magnetic field strength, and experimental results are found to be consistent with the model in which the number and mass of macroparticles arising from a cathode spot are proportional to the cathode sp...
متن کاملEffect Of Bipolar Pulsed Voltage On Properties Of DLC Films Deposited By Inductively Coupled PECVD
Diamond-like carbon (DLC) is a metastable form of amorphous carbon having large sp 3 bonding. DLC films have unique properties such as high hardness, low-friction, good transparency in IR region, chemical inertness and biocompatibility. To have better performance of the coating one should have proper selection of different parameters for deposition. In the present study, DLC films were deposite...
متن کاملCyclic Voltammetric Behavior of Nitrogen-Doped Tetrahedral Amorphous Carbon Films Deposited by Filtered Cathodic Vacuum Arc
Nitrogen-doped tetrahedral amorphous carbon (ta-C :N) films were deposited by filtered cathodic vacuum arc (FCVA) technique using nitrogen as a background gas. The structure of the ta-C :N films was studied with X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy in terms of nitrogen flow rate used during the film deposition. Potential windows of the films measured in deaerated and un...
متن کاملEffects of substrate bias and growth temperature on properties of aluminium oxide thin films by using filtered cathodic vacuum arc
Two sets of aluminium oxide thin films were deposited using off-plane filtered cathodic vacuum arc (FCVA) at the working pressure of 6 10 4 Torr under various substrate biases ( 60 to 140 V) and substrate temperatures (120–600 8C), respectively. Optical and mechanical properties, such as refractive index, residual stress, hardness and Young’s modulus, of the films were investigated. It has been...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Coatings
سال: 2020
ISSN: 2079-6412
DOI: 10.3390/coatings10060545