Effects of Mn addition on aging behavior in Al-1%Mg2Si-0.4%Si alloys.
نویسندگان
چکیده
منابع مشابه
Quench Rate Effects on the Natural Aging Behavior of 7xxx Al-mg-zn-cu Aluminum Alloys
The effect of quench rate on the natural aging behavior was examined using microhardness, conductivity and the differential scanning calorimeter. The data indicated that GPZ formed during extended natural aging of 7075, while extended aging of 7050 resulted in the precipitation of η’. Introduction The aluminum alloy system Al-Zn-Mg-Cu is the mainstay of aluminum alloys used in the aerospace ind...
متن کاملEffect of Sn Addition on the Two-Step Aging Behavior in Al-Mg-Si Alloys for Automotive Application
Aluminum alloys of the 6xxx series which contain excess Si or Cu are well used for the automotive applications because of the high age-hardening response. The effect of addition of small amount of Sn on the two-step aging behavior in 1.2%Mg2Si-0.5%Si in excess alloy and 1.2%Mg2Si-0.7%Cu alloy was investigated by means of hardness measurement, differential scanning calorimetry, and transmission ...
متن کاملTEM Investigation of Precipitation in Al-Mn Alloys with Addition of Zr
Aluminium and its alloys belong to the most widely used metallic materials for industrial applications. One of the possible casting methods is twin-roll casting which produces sheets with high solid solution supersaturation. Decomposition of this supersaturated material during heat treatment was studied in aluminium alloys from the AW-3003 series – one standard grade and the other modified by a...
متن کاملInfluence of Natural Aging Time on Two-Step Aging Behavior of Al-Mg-Si(-Cu) Alloys
Nanoclusters formed during natural aging cause the negative effect of the two-step aging in the age-hardenable Al-Mg-Si alloys. The relationship between the clustering behavior during natural aging and the two-step aging behavior was studied using the hardness, differential scanning calorimetry (DSC), electrical resistivity measurements, transmission electron microscopy (TEM) observation in the...
متن کاملPRECIPITATION STRENGTHENING BEHAVIOR OF Al-Cu-Mn ALLOYS WITH THE EFFECT OF CASTING SEGREGATION
Al-Cu-Mn is one of typical heat-treatable cast alloys with high strength which has been widely used in aerospace and automobile industries. The complete manufacturing process for AlCu-Mn components includes low pressure die casting, T6 heat treatment and machining. It has been found that the property in former process has been transferred to the sequent step with considerable effect. In this pa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Light Metals
سال: 1988
ISSN: 0451-5994
DOI: 10.2464/jilm.38.22