Effects of Low Reynolds Number on Loss Characteristics in Transonic Axial Compressor

Laser Anemometer Measurements in a Transonic Axial Flow Compressor Rotor

Unsteady Transonic Flows in an Axial Flow Compressor*

Introduction. This paper deals with some transonic flow problems for the supersonic axial flow compressor: these arise in connection with flutter analysis for fan blading. Very detailed solutions for unsteady plane transonic flows through a cascade of flat plates have been given by Goldstein Braun and Adamczyk (1977) and Nagashima and Whitehead (1977), see also Goldstein (1975), Kurosaka (1974)...

experimental investigation of reynolds number and blockage effects on aerodynamical characteristics of a standard model at transonic regime

boundary layer growth and hence displacement thickness are the key factors in shock position over aerodynamical surfaces at transonic regimes. since boundary layer growth is a function of free stream reynolds number and also of the transition location, the free stream reynolds number and also the other parameters involved in the boundary layer growth and its transition location are determinant ...

Effect of aging and manufacturing tolerances on multi-stage transonic axial compressor performance

The Axial compressor is an integrated part of a gas turbine. The central part of compressors is its blades. Blade aerodynamic has a significant effect on compressor performance. Because of the adverse pressure gradient in the compressor, any deviation in the blade profile has a significant influence on the flow field as well as the compressor performance. During the manufacturing and operation ...

Effect of blade profile on the performance characteristics of axial compressor in design condition

The choice of geometrical shape of the blades has a considerable effect on aerodynamic performance and flow characteristics in axial compressors. In this paper, the effects of the blades shape on the aerodynamic design characteristics are investigated based on Streamline Curvature Method (SCM). Initially, the Streamline Curvature Method (SCM) is used for designing a two-stage axial compressor. ...