Effects of local fiber discontinuity on the fatigue strength parameter at the fiber inclusion corner in fiber-reinforced composites
نویسندگان
چکیده
Abstract To comprehend the fatigue failure mechanism at fiber discontinuity in fiber-reinforced composites, it is necessary to evaluate local mechanical behaviors. The strength depends on stress distribution inclusion corner. An improved advanced finite element method (IAFEM) proposed for intensity factor (SIF) analysis In IAFEM, stiffness matrix of singular corner (SICE) obtained, and elastic field tip determined. effects load direction, distribution, geometry, material properties SIFs are analyzed numerically using IAFEM. difference between two-dimensional three-dimensional inclusions discussed. IAFEIM calculation results can provide reference preparation composite materials.
منابع مشابه
Fatigue analysis of glass fiber reinforced composites
Some structure materials can match the flexibility and effectiveness of glass fiber Reinforced plastic, commonly called GFRP for short or simply fiberglass. Even it is very high strength, light weight, strong, and completely waterproof, it can be molded into free form shapes such as aerospace structures, and then also it has its endurance limits. Endurance limit means loss of strength and stiff...
متن کاملEffect of Fiber Surface Treatment on Wear Characteristics of Carbon Fiber Reinforced Polyamide 6 Composites
Ozone modification method and air-oxidation were used for the surface treatment of polyacrylonitrile(PAN)-based carbon fiber. The surface characteristics of carbon fibers were characterized by X-ray photoelectron spectroscopy (XPS). The interfacial properties of carbon fiber reinforced polyamide 6 (CF/PA6) composites were investigated by means of the single fiber pull-out tests. As a result...
متن کاملAnalysis of Local Thermomechanical Effects in Fiber-reinforced Periodic Composites
Two approaches are combined to investigate the effect of localized thermomechanical loadings of periodic multiphase materials. The first one, referred to as the representative cell method, reduces the infinite domain problem to a problem for the periodicity cell by means of the discrete Fourier transform. This problem is solved by the discretization of the cell into several subcells and a secon...
متن کاملShear Strength of Fiber-Reinforced Clayey Sands
Consolidated-drained triaxial compression tests were conducted to compare the stress-strain and volume change response of sands and clayey sands reinforced with discrete randomly distributed poly-propylene fibers. The influence of various test parameters such as fiber content (0.0%, 0.5% and 1.0% by weight), clay content (0%, 10% and 20% by weight), relative density (50% and 90%) and confining ...
متن کاملEffect of fiber surface treatments on the fiber-matrix interaction in banana fiber reinforced polyester composites
Cellulosic bers have been used as cost-cutting llers in plastic industry. Among the various factors, the nal performance of the composite materials depends to a large extent on the adhesion between the polymer matrix and the reinforcement and therefore on the quality of the interface. To achieve optimum performance of the end product, suf cient interaction between the matrix resin and th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Science and engineering of composite materials
سال: 2022
ISSN: ['0334-181X']
DOI: https://doi.org/10.1515/secm-2022-0021