Effects of gamma irradiation on structural, thermal and mechanical properties of polyamide-11/halloysite nanotubes nanocomposites
نویسندگان
چکیده
The effect of gamma irradiation on neat Polyamide-11 (PA11) and PA11 filled with 3 wt% halloysite nanotubes (HNTs) was investigated at various doses up to 100 kGy in air room temperature. test conducted sample films prepared by a twin-screw extruder the first step then cast extrusion. study showed formation maximum gel fraction 10 20 for PA11/HNTs, respectively. Furthermore, results indicated occurrence crosslinking low dose, whereas chain scission took place higher ones. Additionally, revealed that presence HNTs limits impacts through barrier effect. An optimum dose found thermal mechanical properties, corresponding formation. Moreover, experimental design implemented highlight main incidences interactions both incorporation radiation some relevant effects irradiation.
منابع مشابه
determination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولinvestigation of the electronic properties of carbon and iii-v nanotubes
boron nitride semiconducting zigzag swcnt, $b_{cb}$$n_{cn}$$c_{1-cb-cn}$, as a potential candidate for making nanoelectronic devices was examined. in contrast to the previous dft calculations, wherein just one boron and nitrogen doping configuration have been considered, here for the average over all possible configurations, density of states (dos) was calculated in terms of boron and nitrogen ...
15 صفحه اولeffects of structural parameters on mechanical properties polymer/clay nanocomposites
nanocomposite materials have recently attracted increasing interests in the field of modelling. finite element modelling can be used for computation of bulk properties of polymer/clay nanocomposites. in this study, by considering the structure of a nano-composite material, a quasi real model is proposed. the model has been used to predict the elastic constants by selection of suitable element...
متن کاملthe effects of planning on accuracy and complexity of iranian efl students’ written narrative task performance
this study compared the different effects of form-focused guided planning vs. meaning-focused guided planning on iranian pre-intermediate students’ task performance. the study lasted for three weeks and concentrated on eight english structures. forty five pre-intermediate iranian students were randomly assigned to three groups of guided planning focus-on-form group (gpfg), guided planning focus...
15 صفحه اولEffective Mechanical Properties of Nanocomposites Reinforced With Carbon Nanotubes Bundle
Nanocomposites made of Carbon Nanotube (CNT) bundles have attracted researchers’ attention due to their unusual properties such as: light weight, flexibility and stiffness. In this paper, the effects of straight and rope-shaped bundles on nanocomposite effective mechanical properties are investigated. First, FEA models are created consisting of CNTs with different shapes of straight and rope-...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Thermoplastic Composite Materials
سال: 2021
ISSN: ['0892-7057', '1530-7980']
DOI: https://doi.org/10.1177/08927057211031966