Effects of compressibility factor on fluid catalytic cracking unit riser hydrodynamics
نویسندگان
چکیده
منابع مشابه
Multifunctional two-stage riser fluid catalytic cracking process
This paper described the discovering process of some shortcomings of the conventional fluid catalytic cracking (FCC) process and the proposed two-stage riser (TSR) FCC process for decreasing dry gas and coke yields and increasing light oil yield, which has been successfully applied in 12 industrial units. Furthermore, the multifunctional two-stage riser (MFT) FCC process proposed on the basis o...
متن کاملCatalytic Cracking of Cumene in a Riser Simulator
Manuscript for the special IECR issue CREVIII conference held in Barga, Italy on June 24-29, 2001 Catalytic Cracking of Cumene in a Riser Simulator A catalyst activity decay model S.Al-Khattaf (2) and H. de Lasa (1.*) (1) Chemical Reactor Engineering Centre, Faculty of Engineering Science, University of Western Ontario, London, Ontario, Canada N6A 5B9 (2) Department of Chemical Engineering, Kin...
متن کاملApplication of Zeolitic Additives in the Fluid Catalytic Cracking (FCC)
Current article describes application of zeolites in fluid catalytic cracking (FCC). The use of several zeolitic additives for the production light olefins and reduction of pollutants is described. Application of zeolites as fluid catalytic cracking (FCC) catalysts and additives due to the presence of active acid sites in the zeolite framework increase the formation of desired cracking product...
متن کاملEnvironmental study of waste energy recovery by using exergy and economic analysis in a fluid catalytic cracking unit
An increase in fossil fuel consumption has significantly increased the concentration of greenhouse gases (GHGs). Waste energy recovery can reduce GHGs by reducing fossil fuel consumption. In the FCC unit in refineries, the catalyst is continuously regenerated by burning off the deposited coke with air and a large flux of waste gas with high temperature is generated which is vented into the atmo...
متن کاملApplication of Modified Multi Model Predictive Control Algorithm to Fluid Catalytic Cracking Unit
This paper presents a modified multi model predictive control algorithm for the control of riser outlet temperature and regenerator temperature for the fluid catalytic cracking unit (FCCU). The models of the fluid catalytic cracking unit are estimated using subspace identification (N4SID) algorithm. The PRBS signal is applied as an input signal to estimate the FCCU models. Since the estimated m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Fuel
سال: 2018
ISSN: 0016-2361
DOI: 10.1016/j.fuel.2018.02.179