Effective transport properties for the pyridine-granular activated carbon adsorption system

Adsorption of Volatile Organic Compounds from Aqueous Solution by Granular Activated Carbon (GAC) in Batch System

Experimental and Theoretical Study on the CH4 Adsorption by Granular and Microporous Activated Carbon

Adsorbed natural gas (ANG) by Granular Activated Carbon (GAC) has been widely investigated as an alternative to CNG and LNG technologies for storage and transportation of natural gas. In the present work, a theoretical and experimental study was conducted to accurately determine the amount of adsorption of CH4 by GAC. To carry out the experiments, the volumetric method was used up to 4 MPa at c...

Characterizing Adsorption Performance of Granular Activated Carbon with Permittivity

A number of studies have achieved the consensus that microwave thermal technology can regenerate the granular activated carbon (GAC) more efficiently and energy-conservatively than other technologies. In particular, in the microwave heating industry, permittivity is a crucial parameter. This paper developed two equivalent models to establish the relationship between effective complex permittivi...

Modeling studies for adsorption of phenol and co-pollutants onto granular activated carbon prepared from olive oil industrial waste

Granular activated carbon (OSAC) which was derived from olive oil industrial solid waste was chemically activated with different concentrations of phosphoric acid. OSAC-materials were evaluated for their ability to remove phenol from aqueous solution in a batch technique. Adsorption isotherms were determined and modeled with five linear Langmuir forms, namely the Freundlich, Elovich, Temkin, Ki...

Removal of copper (II) from aqueous solutions by adsorption onto granular activated carbon in the presence of competitor ions

In this work, the removal of copper from an aqueous solution by granular activated carbon (GAC) in the presence of competitor ions was studied. A batch adsorption was carried out and different parameters such as pH, contact time, initial copper concentration and competitor ions concentration were changed to determine the optimum conditions for adsorption. The optimum pH required for maximum ads...