منابع مشابه
Numerical Analysis of End Plate Bolted Connection with Corrugated Beam
Steel extended end plate bolted connections are recommended to be widely utilized in special moment-resisting frame subjected to monotonic loading. Improper design of steel beam to column connection can lead to the collapse and fatality of structures. Therefore comprehensive research studies of beam to column connection design should be carried out. Also the performance and effect of corrugated...
متن کاملComparison of plasticity and stiffness of steel shear walls with composite steel plate shear wall
The steel shear wall and composite steel plate shear wall is introduced in recent three decade and is considered and is spread rapidly. Composite steel plate shear wall which is made of a layer of thin steel sheet with coating of reinforced concrete in one or both sides of steel palate is considered a third generation of resistance shear walls against lateral loads that in addition to increasin...
متن کاملEffective stiffness of unreinforced brick masonry walls
Code design of Unreinforced Masonry (URM) buildings is based on elastic analysis, which requires as input parameter the effective stiffness of URM walls. Current approaches estimate the effective stiffness as fixed ratio of the gross sectional stiffness but comparisons with experimental results have shown that this does not yield satisfactory predictions. In this paper, a recently developed ana...
متن کاملRotational Stiffness at Ridges of Timber Folded-plate Structures
Folded-plate structures provide an efficient design using thin laminated veneer lumber panels. Inspired by Japanese furniture joinery, the multiple tab-and-slot joint was developed for the multi-assembly of timber panels with non-parallel edges without adhesive or metal joints. Because the global analysis of our origami structures reveals that the rotational stiffness at ridges affects the glob...
متن کاملExperimental Heat Transfer Studies of Water in Corrugated Plate Heat Exchangers: Effect of Corrugation Angle
In the present investigations heat transfer studies are made in three different types of corrugated plate heat exchangers having a length of 30 cm and width of 10 cm. The corrugated channel has a spacing of 5 mm. Three different corrugation angles are used in this study which are 30 0 , 40 0 and 50 0 . Water is taken as test fluid as well as the heating medium. The wall temperatures are measure...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Computational Continuum Mechanics
سال: 2011
ISSN: 1999-6691
DOI: 10.7242/1999-6691/2011.4.2.20