Effective properties of a porous inhomogeneously polarized by direction piezoceramic material with full metalized pore boundaries: Finite element analysis

Finite element modelling of dense and porous piezoceramic disc hydrophones.

The acoustic characteristics of dense and porous piezoceramic disc hydrophones have been studied by finite element modelling (FEM). The FEM results are validated initially by an analytical model for a simple disc of dense piezoceramic material and then it is extended to a porous piezoceramic disc replicating a foam-reticulated sample. Axisymmetric model was used for dense piezoceramic hydrophon...

Static Analysis of Orthotropic Functionally Graded Material Cylinders with Finite Length by a Mesh-Free Method

In this paper static analysis of orthotropic functionally graded material (FGM) cylinders with finite length was carried out by a mesh-free method. MLS shape functions are used for approximation of displacement field in the weak form of equilibrium equation and essential boundary conditions are imposed by transformation method. In this simulation, an ax symmetric model is used. Mechanical prope...

Nonlinear Finite Element Analysis of Thermoelastic Stresses of FGM Rotating Disk Considering Temperature-Dependency of Material Properties

In the present paper, nonlinear radial and hoop thermoelastic stresses analysis of a disk made of FGMs material is investigated. According to this purpose, finite element method is used. In the present method, second-order one-dimensional element (with three node points) is proposed. The geometrical and stress boundary conditions are defined in the state of non-existence of external pressure an...

Prediction of Crack Initiation Direction for Inclined Crack Under Biaxial Loading by Finite Element Method

This paper presents a simple method based on strain energy density criterion to study the crack initiation angle by finite element method under biaxial loading condition. The crack surface relative displacement method is used to eliminate the calculation of the stress intensity factors which are normally required. The analysis is performed using higher order four node quadrilateral element. The...

Assessment of Effective Elastic Properties of Honeycomb Cores by Finite Element Analysis of Sandwich Panels