Effect of Y on Microstructure and Properties of Al0.8FeCrCoNiCu0.5 High Entropy Alloy Coating on 5083 Aluminum by Laser Cladding
نویسندگان
چکیده
To improve the surface properties of 5083 aluminum, Al0.8FeCrCoNiCu0.5Yx (x = 0, 0.05, 0.1, and 0.2) high-entropy alloy coatings were prepared by laser cladding. The phase structure microstructure characterized XRD SEM. tribological coating tested a friction wear tester. An electrochemical workstation corrosion resistance coating. results show that when Y content is less than 0.2, in FCC1, BCC1, BCC2 phases. When added to appears rich phase. With increased content, hardness can increase. average Y0, Y0.05, Y0.1, Y0.2 are 479HV0.2, 517HV0.2, 532HV0.2, 544HV0.2, respectively. Microstructure evolution leads an increase effect on consistent with hardness. Al0.8FeCrCoNiCu0.5Y0.2 has lowest rate, at 8.65 × 10−6 mm3/Nm. current density Al0.8FeCrCoNiCu0.5Y0.05 Al0.8FeCrCoNiCu0.5Y0.1 order 10−8, which Al0.8FeCrCoNiCu0.5. performance each component superior substrate.
منابع مشابه
control of the optical properties of nanoparticles by laser fields
در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...
15 صفحه اولEffect of Harmonic Vibration on Microstructure and Mechanical Properties of AA-5083-H321 Aluminum Alloy GMAW Welds
In this research, the effect of vibration at the resonant range (75 Hz) on the hardness and tensile strength of AA-5083-H321 aluminum alloy, were welded by gas metal arc welding (GMAW) investigated. Vibration forces were ranged from 850 N to 2200 N, under identical welding parameters. Tensile strength and hardness testing of welded samples were performed. After mechanical tests, the fracture su...
متن کاملEffect of Harmonic Vibration on Microstructure and Mechanical Properties of AA-5083-H321 Aluminum Alloy GMAW Welds
In this research, the effect of vibration at the resonant range (75 Hz) on the hardness and tensile strength of AA-5083-H321 aluminum alloy, were welded by gas metal arc welding (GMAW) investigated. Vibration forces were ranged from 850 N to 2200 N, under identical welding parameters. Tensile strength and hardness testing of welded samples were performed. After mechanical tests, the fracture su...
متن کاملMetallurgical and mechanical properties of laser cladded AlFeCuCrCoNi-WC10 high entropy alloy coating
In spite of excellent corrosion resistance, good ductility and low cost of AISI 316 austenitic stainless steel, the low hardness and poor mechanical charecteristic of material restricts its applicability in several industrial services. To improve upon mechanical properties AlFeCuCrCoNi-WC10 high-entropy alloy coatings were deposited via laser cladding on austentic stainless steel AISI 316 subst...
متن کاملEffect of Cobalt on Microstructure and Wear Resistance of Ni-Based Alloy Coating Fabricated by Laser Cladding
Ni-based alloy powders with different contents of cobalt (Co) have been deposited on a 42CrMo steel substrate surface using a fiber laser. The effects of Co content on the microstructure, composition, hardness, and wear properties of the claddings were studied by scanning electron microscopy (SEM), an electron probe microanalyzer (EPMA), X-ray diffraction (XRD), a hardness tester, and a wear te...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Lubricants
سال: 2023
ISSN: ['2075-4442']
DOI: https://doi.org/10.3390/lubricants11020050