Effect of Warm-Rolling Conditions on Mechanical Propertiesof Magnesium Alloy AZ31 Sheet
نویسندگان
چکیده
منابع مشابه
On the Optimisation of Superplastic Free Forming Test of an AZ31 Magnesium Alloy Sheet
This paper presents a comparison between a number of different failure prediction methods forsuperplastic forming processes. Attention is limited here to superplastic forming of Ti-6Al-4V at 927C. Thefailure prediction methods considered include the flow localisation factor approach, forming limit curvesbased on void growth models, such as the Rice and Tracey model and the Cocks and...
متن کاملStatistical analysis on static recrystallization texture evolution in cold-rolled AZ31 magnesium alloy sheet.
Cast AZ31B-H24 magnesium alloy, comprising Mg with 3.27 wt% Al and 0.96 wt% Zn, was cold rolled and subsequently annealed. Global texture evolutions in the specimens were observed by X-ray diffractometry after the thermomechanical processing. Image-based microstructure and texture for the deformed, recrystallized, and grown grains were observed by electron backscattered diffractometry. Recrysta...
متن کاملSuperplastic Forming of AZ31 Magnesium Alloy Sheet into a Rectangular Pan
Superplastic behaviour of Mg-alloy AZ31 was investigated to clarify the possibility of its use for superplastic forming (SPF) and to accurately evaluate material characteristics under a biaxial stress by utilizing a multi-dome test. The material characteristics were evaluated under three different superplastic temperatures, 643, 673, and 703 K in order to determine the most suitable superplasti...
متن کاملEffect of Thermal History on Microstructures and Mechanical Properties of AZ31 Magnesium Alloy Prepared by Friction Stir Processing
Hot-rolled AZ31 (Mg-2.57Al-0.84Zn-0.32Mn, in mass percentage) magnesium alloy is subjected to friction stir processing in air (normal friction stir processing, NFSP) and under water (submerged friction stir processing, SFSP). Thermal history of the two FSP procedures is measured, and its effect on microstructures and mechanical properties of the experimental materials is investigated. Compared ...
متن کاملEffect of Temperature on Diffusion-Bonded Joint of AZ31 Magnesium and 7075 Aluminum Alloy
In this study, the effect of temperature on the diffusion welding of AZ31 magnesium alloy and 7075 aluminum was discussed. Diffusion welding temperature was the most important parameter since all mechanisms are sensitive to temperature in Diffusion welding method. Intrusive contacts between the two alloys at temperatures of 430, and 440 °C 450 and took 60 min. In all tests constant pressure and...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Technology of Plasticity
سال: 2007
ISSN: 0038-1586,1882-0166
DOI: 10.9773/sosei.48.417