EFFECT OF VERTICAL WEB STIFFENERS ON LATERAL TORSIONAL BUCKLING BEHAVIOR OF CANTILEVER STEEL I-BEAMS
نویسندگان
چکیده
منابع مشابه
Lateral Torsional Buckling of Steel Thin-Walled Beams with Lateral Restraints
Metal thin-walled members have been widely used in building industry. Usually they are utilized as purlins, girts or ceiling beams. Due to slenderness of thin-walled cross-sections these structural members are prone to stability problems (e.g. flexural buckling, lateral torsional buckling). If buckling is not constructionally prevented their resistance is limited by buckling strength. In practi...
متن کاملLateral-torsional buckling resistance of cold-formed high strength steel rectangular hollow beams
Hollow sections have been widely used for steel structures. Applications of High Strength Steel (HSS) on cold-formed hollow sections lead to thinner and lighter structures. This paper presents numerical investigations on the lateral-torsional buckling resistance of the cold-formed high strength steel rectangular hollow beam. Results from finite element analysis using Abaqus software are compare...
متن کاملLateral buckling of web-tapered I-beams: A new theory
This paper presents a new theory for the lateral buckling of web-tapered I-beams. Linear analysis is first conducted by taking account into the tapering effects of web-tapered I-beams, where the deformation compatibilities of the two flanges and web are considered in terms of the basic assumptions of thin-walled members. Subsequently, the total potential for the lateral buckling analysis of web...
متن کاملThe effect of discrete lateral and torsional bracings stiffness on the elastic lateral-torsional buckling of mono-symmetric I beam, under the concentrated moment
When the out-of-plane stiffness of a beam is remarkably lower than the in-plane stiffness, the lateral-torsional buckling occurs. In this study, the behavior of mono-symmetric I-beams with discrete torsional and lateral bracings under the concentrated moment is investigated using the finite element analyses. Then, based on the numerical analyses, equation for the stiffness requirement is propos...
متن کاملDEVELOPMENT OF NEURAL NETWORK MODELS TO ESTIMATE LATERAL-DISTORTIONAL BUCKLING RESISTANCE OF CELLULAR STEEL BEAMS
The lateral-torsional buckling (LTB) strength of cellular steel girders that were subjected to web distortion was rarely examined. Since no formulation has been presented for predicting the capacity of such beams, in the current paper an extensive numerical investigation containing 660 specimens was modeled using finite element analysis (FEA) to consider the ultimate lateral-distortional buckli...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of applied mechanics
سال: 2004
ISSN: 1345-9139,1884-832X
DOI: 10.2208/journalam.7.233