Effect of thione primers on adhesive bonding between an indirect composite material and Ag-Pd-Cu-Au alloy
نویسندگان
چکیده
منابع مشابه
Effect of noble metal adhesive systems on bonding between an indirect composite material and a gold alloy.
In this study, the bond strength between an indirect composite and a gold alloy was determined for the purpose of evaluating noble metal bonding systems. A single liquid primer designed for conditioning noble metal alloys (Infis Opaque Primer) and tri-n-butylborane-initiated adhesive resins (Super-Bond C & B), with or without the powder component, were assessed. Cast gold alloy disks (Casting G...
متن کاملEffects of primers containing thiouracil and phosphate monomers on bonding of resin to Ag-Pd-Au alloy.
The purpose of the present study was to evaluate the effects of four experimental primers on bond strength between a self-curing luting agent and silver-palladium-gold alloy. The experimental primers were in mixed solutions of a thiouracil primer (Metaltite) and a phosphate primer (Epricord, PM, PE, or PP), which were designated as Metaltite/Epricord, Metaltite/PM, Metaltite/PE, and Metaltite/P...
متن کاملHardness and Composition of Solution-Treated Ag-Pd-Cu-Au Alloy Microstructures
An Ag-Pd-Cu-Au casting alloy was subjected to solution treatment at various temperatures. The dynamic hardness of each resultant microstructure and the Vickers hardness of the whole alloy were measured to investigate their relationship with changes in metal and crystal structure of the alloy and microstructural elemental concentration. The samples following solution treatment at 650, 700, 750, ...
متن کاملBonding of an indirect composite material to a magnetic stainless steel alloy
Purpose: The purpose of the present study was to investigate the bond strength of an indirect composite material to a magnetic stainless steel alloy. Materials and Methods: The surfaces of machined magnetic stainless steel alloy specimens were abraded with 600-grit silicon carbide paper and then grouped according to the type of surface treatment given: 1) without preparation, 2) tribochemical s...
متن کامل[Bonding of veneering resin and dental alloy with 4-META/MMA-TBB opaque resin. Adhesive durability of surface treated Au-Ag-Pd alloy].
Bonding between laboratory light-cured composite and surface treated Au-Ag-Pd alloy was investigated using newly developed 4-META/MMA-TBB opaque resin. Shear bond strength after 20,000 thermocycles obtained from heated alloy with this method was 25.1 MPa. Ion-coated specimen showed 25.6 MPa after 50,000 thermocycles with decrease in bond strength being small. Ferric chloride treated specimen, h...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Dental Materials Journal
سال: 2014
ISSN: 0287-4547,1881-1361
DOI: 10.4012/dmj.2014-187