EFFECT OF TEMPERATURE ON MgO ACTIVITY IN THE CaO-SiO2-MgO-Al2O3 SYSTEM MEASURED BY MOLTEN TIN

نویسندگان

چکیده

Blast-furnace slag is one of the main by-products produced in process blast-furnace ironmaking. Its metallurgical properties have an important impact on smooth operation and long life blast furnaces. In this paper, activity MgO a CaO-SiO2-MgO-Al2O3 quaternary system was measured using reference-slag method at 1773–1873 K. The effects temperature coefficient Mg Sn were discussed. results showed that when w(MgO)/w(Al2O3) = 0.40, B(w(CaO)/w(SiO2)) 1.30 w(Al2O3) (12 %; 15 18 20 %), increased with increasing temperature. With temperature, grooves SiO4 tetrahedral structure wavenumbers 800–1200 cm–1 gradually became shallow flat, indicating complex silicate synthesized form SiO2 decreased increased. According to CaF2-MgO binary phase diagram, dissolution enthalpy calculated be –16.409 kJ/mol.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Thermodynamic simulation on mineralogical composition of CaO–SiO2–Al2O3–MgO quaternary slag system

It is necessary to elucidate the crystallization thermodynamic of mineralogical phases during the cooling process of the molten BFS with different chemical composition, because the high-melting point mineral phase maybe crystallized during the fiber forming and thereafter cooling process. Thermodynamic calculation software FactSage6.4 and the hot remelting experiments were performed to explore ...

متن کامل

Experimental Study on the Behavior of TiN and Ti2O3 Inclusions in Contact with CaO‐Al2O3‐SiO2‐MgO Slags

TiN and Ti2O3 are the predominant inclusion types in Ti-alloyed ferritic chromium stainless steels. In order to ensure the required steel cleanness level, an effective removal of such inclusions in the slag during secondary metallurgy is essential. This inclusion removal predominantly takes place via dissolution of the inclusion in the slag. The dissolution behavior of TiN and Ti2O3 in CaO-SiO2...

متن کامل

Ternary System Al2O3–MgO–CaO: I, Primary Phase Field of Crystallization of Spinel in the Subsystem MgAl2O4–CaAl4O7–CaO–MgO

Using a novel experimental procedure in the field of ceramics/materials science that is based on the precise microanalysis (scanning electron microscopy, coupled with wavelength-dispersive spectroscopy) of the phases that are present in equilibrated specimens, the solid-state compatibility relations in the subsystem MgAl2O4–CaAl4O7–CaO– MgO and the melting relationships in the subsystems MgAl2O...

متن کامل

Experimental Establishment of the CaAl2O4–MgO and CaAl4O7–MgO Isoplethal Sections within the Al2O3–MgO–CaO Ternary System

The isoplethal sections CaAl2O4–MgO and CaAl4O7–MgO of the Al2O3–MgO–CaO ternary system have been experimentally established at 1 bar total pressure and air of normal humidity. The sections obtained provide new data and information that are in disagreement with thermodynamic evaluations and optimizations of the Al2O3–MgO–CaO ternary system published to date. These differences arise mainly from ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Materiali in Tehnologije

سال: 2022

ISSN: ['1580-2949', '1580-3414']

DOI: https://doi.org/10.17222/mit.2021.262