Effect of supporting electrolyte concentration on one-step electrodeposited CuInS2 films for ZnS/CuInS2 solar cell applications
نویسندگان
چکیده
منابع مشابه
Effect of Annealing on Physical Properties of Cu2ZnSnS4 (CZTS) Thin Films for Solar Cell Applications
Cu2ZnSnS4 (CZTS) thin films were prepared by directly sputteringCu (In,Ga)Se2 quaternary target consisting of (Cu: 25%, Zn: 12.5%, Sn; 12.5%and S: 50%). The composition and structure of CZTS layers have beeninvestigated after annealing at 200 0C, 350 0C and 500 0C under vacuum. Theresults show that recrystallization of the CZTS thin film occurs and increasingthe grain size with a preferred orie...
متن کاملOne-Step Electrodeposited Cu-In-Ga Thin Films and Cu(In,Ga)Se2 Absorber Synthesis for Solar Cells
Cu-In-Ga electrodeposition on Mo substrate is carried out in acidic aqueous media. Subsequent selenization leads to Cu(In,Ga)Se2 absorber for thin film solar cells. First, conditions to achieve onestep Cu-In-Ga electrodeposition are analysed. Then, Cu-In and CuGa systems are studied. Cu-In electrodeposition is realized under diffusion-control conditions. For Cu-Ga system, first Cu(II) diffusion...
متن کاملFabrication of CuInS2 films from electrodeposited Cu/In bilayers: effects of preheat treatment on their structural, photoelectrochemical and solar cell properties.
Polycrystalline CuInS(2) films were fabricated by sulfurization of electrodeposited Cu and In metallic precursor films in a Cu-rich composition at 520 °C in H(2)S (5% in Ar). Structural analyses revealed that the adherence of the thus-formed CuInS(2) film to the Mo substrate was strongly dependent on heating profiles of the Cu/In bilayer film: a CuInS(2) film with poor adherence having many cre...
متن کاملStudies on the Capacitance of Nickel Oxide Films: Effect of Heating Temperature and Electrolyte Concentration
Nickel oxide films were prepared by electrochemically precipitating the hydroxide and heating it in air to form the oxide. The resulting oxide films behave as a capacitor. The capacitance of the oxide depends on the heating temperature, showing a maximum at 3008C. The mechanism of charge storage was studied by measuring the capacitance and surface area as a function of heating temperature, and ...
متن کاملAnnealing effect on Sb2S3-TiO2 nanostructures for solar cell applications
Nanostructures composited of vertical rutile TiO2 nanorod arrays and Sb2S3 nanoparticles were prepared on an F:SnO2 conductive glass by hydrothermal method and successive ionic layer adsorption and reaction method at low temperature. Sb2S3-sensitized TiO2 nanorod solar cells were assembled using the Sb2S3-TiO2 nanostructure as the photoanode and a polysulfide solution as an electrolyte. Anneali...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Solid State Electrochemistry
سال: 2020
ISSN: 1432-8488,1433-0768
DOI: 10.1007/s10008-020-04622-1