Effect of Supercritical Drying Method on Microstructure and Properties of Al2O3 Composites Reinforced with Ultrafine SiC Particulate.
نویسندگان
چکیده
منابع مشابه
The Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites
In this research, the SiC-matrix composite with different amounts of TiC (0, 2.5, 5, 7.5, and 10 wt%) supplemented with additives including 4.3 wt% Al2O3 and 5.7 wt% Y2O3 were utilized to initiate the required liquid phase. The sintering process was performed using pressureless sintering at 1900 °C for 1.5 hours under argon atmosphere. The compos...
متن کاملPhysio-mechanical Properties of Aluminium Metal Matrix Composites Reinforced with Al2O3 and SiC
Particulate reinforced metal matrix composites (MMCs) are potential materials for various applications due to their advantageous of physical and mechanical properties. This paper presents a study on the performance of stir cast Al2O3 SiC reinforced metal matrix composite materials. The results indicate that the composite materials exhibit improved physical and mechanical properties, such as, lo...
متن کاملFsw Of Polypropylene Reinforced With Al2o3 Nano Composites, Effect On Mechanical And Microstructural Properties
Friction stir welding is a solid state joining process first used for welding of Aluminum and its alloys, is now employed for welding of polymers and composite materials. Polypropylene (pp) is one of polymer materials used in many applications due to its good performance, high strength to weight ratio and excellent processing properties, its application is limited due to its weak abrasive prope...
متن کاملthe effect of explicit teaching of metacognitive vocabulary learning strategies on recall and retention of idioms
چکیده ندارد.
15 صفحه اولmicrostructure and mechanical properties of al2o3-sic nanocomposites with 0.05% mgo and different sic volume fraction
abstract: in this study, al 2 o 3 –sic nanocomposites have been fabricated by mixing of alumina powder containing 0.05% weight magnesium oxide and silicon carbide nano powders, followed by hot pressing at 1650 0 c. the mechanical properties of al 2 o 3 -sic nanocomposites containing different volume fraction (2.5, 5, 7.5, 10 and 15%) of nano scale sic particles were investigated and compared wi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 1999
ISSN: 0914-5400,1882-1022
DOI: 10.2109/jcersj.107.460