Effect of Squeeze Casting Parameter Process ( Melt Temperature, Die Temperature And Al-3,22%Si ) On Microstructure, Hardness And Tensile Strength In Thin Wall Casting
نویسندگان
چکیده
منابع مشابه
The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting
The aim of this work was WC distribution in base Al-Si-Mg (A356) alloy as reinforcing agent. WC Solid particles in the sub-23-nm size range added to melted alloy by centrifuge casting. The cylinder tube without gap was obtained. FESEM and OPM results show that the distribution depends upon the rotational speeds of the mould and centrifugal casting conditions. According to the MAP results, durin...
متن کاملInfluence of Casting Temperature on Electrochemical Behavior of Al-Zn-In Sacrificial Anodes
Aluminum anodes have been widely used in the cathodic protection of marine structures. However there are conditions in which these anodes become passivated or face some localized or unwanted corrosion, which influences their efficiency. Addition of alloying elements such as Zn and In not only have improved the efficiency of the anodes but also the effect of casting parameters such as ultra ...
متن کاملMicrostructure Formation in Thin Slab Casting
New processes have been developed in the last years to produce near net shape steel products by continuous casting. This work deals with the analysis of the effects of liquid core reduction during the solidification in the microstructure of thin slabs obtained by continuous cast process. An equipment able to simulate the liquid core reduction during the solidification was projected and construc...
متن کاملA feasibility study of the partial squeeze and vacuum die casting process
A feasibility study of the partial squeeze and vacuum die casting process was performed to make defect-free casting products with excellent mechanical properties. The trial die casting process in this study was industrially implemented for producing a reaction shaft support made of a hyper eutectic Al±15%Si alloy. To combine the squeezing and vacuum effect, the plunger injection system was desi...
متن کامل“ Microstructural and mechanical properties of eutectic Al – Si alloy with grain refined and modified using gravity - die and sand casting ”
This paper attempts to investigate the influence of the microstructure and mechanical property changes on sand casting and permanent die casting alloys by grain refinement, modification combined action of both (Al– 3Ti–1B + Al–10Sr) and without grain refinement and modification effect. The microstructures of the castings are studied by optical microscopes. The microstructure and mechanical prop...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Suara Teknik: Jurnal Ilmiah
سال: 2010
ISSN: 2579-4698,2086-1826
DOI: 10.29406/stek.v1i1.299