Effect of solid solution heat treatment following age hardening on microstructure and mechanical properties of 7000 series power aluminum alloy
نویسندگان
چکیده
منابع مشابه
EFFECT OF T6 HEAT TREATMENT ON MECHANICAL PROPERTIES OF CERAMIC REINFORCED CASTED ALUMINUM ALLOY
Aluminium base alloy (Al-Cu-Si) was reinforced with silicon carbide (SiC) particles, in various percentage compositions from 0-20 wt%. Silicon carbide particle size of 20µm was selected. The molten slurry of SiC reinforced base aluminium metal was casted through green and dry sand casting methods and solidification process was carried out under ambient conditions. A selected population...
متن کاملEffect of Heat Treatment on Microstructure, Magnetic and Mechanical Properties of HSLA-100
In this study, the effects of various heat treatments on microstructure, mechanical and magnetic properties of HSLA-100 steel were evaluated. The heat treatments consisted of austenitizing at 900°C for 60 minutes, then quenching by different cooling rates via furnace, air, oil and water; and quenched specimens were aged at 600°C for one hour. Optical and field emission scanning electron m...
متن کاملEffect of Heat Treatment Parameters on the Mechanical and Microstructure Properties of Low-Alloy Steel
This study examines the effect of heat treatment at three different temperatures of 800 ̊C, 950 ̊C and 1100 ̊C on the microstructure and mechanical properties of low-alloy steel with an addition of manganese, chrome and lead. To determine an impact of the applied heat treatment operations, testing of mechanical properties and microstructural examinations of the steel with 0.23%, 0.24%, 0.29% and 0...
متن کاملEffect of Heat Treatment on Mechanical Properties and Microstructure of Alloy 901
Two types of heat treatments are commonly used for alloy 901, one to optimize resistance to creep and rupture and the other, to improve tensile and fatigue properties. Solution and aging-treatment parameters (temperature, time, quench) for both types of heat treatment were varied within the ranges permitted by common specifications to define heat treatments resulting in improved combinations of...
متن کاملEffect of Solution Treatment Temperature on Microstructure and Mechanical Properties of A356 Alloy
Over the years, aluminum content in a vehicle part is increasing due to the needs to reduce weight as well as increase fuel efficiency. Most of the cast product in a vehicle part is mostly cast from A356 alloy. It is used because A356 alloy posses’excellent characteristics over other type of alloy such as cast ability, high weight-to-strength ratio, good corrosion resistance and good weld-abili...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research Express
سال: 2020
ISSN: 2053-1591
DOI: 10.1088/2053-1591/ab6775