Effect of Shear Rate Shear Strength of Sand Mixed with Fibre-Pine Shaving

Effect of Cementation on the Shear Strength of Tehran Gravelly Sand Using Triaxial Tests

Punching shear strength of steel fibre reinforced concrete slabs

The ultimate strength of reinforced concrete slabs is frequently governed by the punching shear capacity, which may be increased with addition of traditional fitments such as reinforcing steel, headed studs or shear heads. In addition to these traditional methods of strengthening against punching, steel fibre reinforcement has proved to be an effective and viable alternative. The addition of fi...

Shear Strength of Fiber-Reinforced Clayey Sands

Consolidated-drained triaxial compression tests were conducted to compare the stress-strain and volume change response of sands and clayey sands reinforced with discrete randomly distributed poly-propylene fibers. The influence of various test parameters such as fiber content (0.0%, 0.5% and 1.0% by weight), clay content (0%, 10% and 20% by weight), relative density (50% and 90%) and confining ...

Shear Strength Characteristics in Aged Polyester-glass Fibre Composites

Researches on the effects produced by the sun light upon polymeric matrix composites have been increased on the last ten years. It is commonly to find literature about mechanical characteristics degradation due to different environment effects. But a few ones are related to the shear behaviour. Moreover a limited studies are related to glass fibre polyester, even that are the composites most co...

Shear Strength of Soil

One of the most important and the most controversial engineering properties of soil is its shear strength or ability to resist sliding along internal surfaces within a mass. The stability of a cut, the slope of an earth dam, the foundations of structures, the natural slopes of hillsides and other structures built on soil depend upon the shearing resistance offered by the soil along the probable...