Effect of Pulsating Gas Injection on Granular Flow in Gas-Solid Fluidized Beds.
نویسندگان
چکیده
منابع مشابه
Effect of internal tubes on the flow structures in gas-solid fluidized beds
The influence of internal tubes present in the fluidized bed on its hydrodynamic behavior was examined in this study. One tube was completely immersed in the bed of 650 m glass beads at 10 cm above the air distributor in the 15 cm inner diameter fluidized bed column of aspect ratio 1. The pressure fluctuations signal was collected over 300 s and was consequently analyzed by the both statistical...
متن کاملEffect of Bed Diameter on the Hydrodynamics of Gas-Solid Fluidized Beds
Effect of scale on the hydrodynamics of gas-solid fluidized beds was investigated in two fluidized beds of 152 mm and 78 mm in diameter. Air at room temperature was used as the fluidizing gas in the bed of sand particles. The Radioactive Particle Tracking (RPT) technique was employed to obtain the instantaneous positions of the particles at every 20 ms of the experiments. These data were u...
متن کاملMixing Behaviors of Wet Granular Materials in Gas Fluidized Beds
The mixing behaviors of dry and wet granular materials in gas fluidized bed systems were investigated computationally using the combined Computational Fluid Dynamics and Discrete Element Method (CFD-DEM). Dry particles were observed to mix fairly rapidly during the fluidization process due to vigorous relative motions between particles induced by the flow of gas. In contrast, due to the presenc...
متن کاملHeat Transfer Mechanisms in a Gas – Liquid-Solid Fluidized Beds
Three-Phase Fluidized Beds have found an important place in processing technology as Reactors. Gas-Liquid-Solid fluidization is considered in the present paper as operating bed of fluidized solid particles simultaneously with co-current upward flow of a continuous liquid phase and a gaseous phase dispersed in the form of bubbles. In the present study, the experimental work of the author on heat...
متن کاملHybrid Two-Fluid DEM Simulation of Gas-Solid Fluidized Beds
Simulations of gas-solid fluidized beds have been performed using a hybrid simulation method, which couples the discrete element method (DEM) for particle dynamics with the averaged two-fluid (TF) continuum equations for the gas phase. The coupling between the two phases is modeled using an interphase momentum transfer term. The results of the hybrid TF-DEM simulations are compared to experimen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
سال: 2001
ISSN: 0387-5016,1884-8346
DOI: 10.1299/kikaib.67.342