Effect of Non-Newtonian Flow on Polymer Flooding in Heavy Oil Reservoirs

A Study on the Mechanism of Urea-assisted Steam Flooding in Heavy Oil Reservoirs

The Biqian-10 block, located in Henan Oilfield of Sinopic, contains many thin and interbedded reservoirs, which have been operated by cyclic steam stimulation for 20 years or more. Therefore, it is a challenge to implement the conventional steam flooding. In order to improve the recovery of steam flooding, urea was used to assist steam flooding. Urea can decompose into CO2 and NH3, which are be...

Effect of Fractional Flow Curves on the Heavy Oil and Light Oil Recoveries in Petroleum Reservoirs

Optimized polymer enhanced foam flooding for ordinary heavy oil reservoir after cross-linked polymer flooding

A successful cross-linked polymer flooding has been implemented in JD reservoir, an ordinary heavy oil reservoir with high permeability zones. For all that, there are still significant volumes of continuous oil remaining in place, which can not be easily extracted due to stronger vertical heterogeneity. Considering selective plugging feature, polymer enhanced foam (PEF) flooding was taken as fo...

RESEARCH ON CO2 FLOODING FOR IMPROVED OIL RECOVERY IN WATER FLOODING ABANDONED RESERVOIRS

CO2 injection is an effective technique for improved oil recovery in light oil reservoirs, especially for water flooding abandoned reservoirs. In this study, the lower part of Es1 reservoirs in Pucheng oilfield was introduced as the target reservoir. By studying the minimum miscible pressure in CO2 flooding, the reservoir could achieve miscible flooding. Long core displacement experiments prove...

The Performance Evaluation of Viscous-Modified Surfactant Water Flooding in Heavy Oil Reservoirs at Varying Salinity of Injected Polymer-Contained Surfactant Solution

This study examines the effects of change in the concentrations of monovalent and divalent ions in the polymer-contained surfactant solution on the macroscopic behavior of viscous-modified surfactant waterflooding in heavy oil reservoirs. Salts that are used in this set of floods were sodium chloride, magnesium chloride, and calcium chloride. The results indicate that four different ranges ...