Effect of Nanostructured Microporous Surfaces on Pool Boiling Augmentation
نویسندگان
چکیده
منابع مشابه
Fabrication of nanowires on orthogonal surfaces of microchannels and their effect on pool boiling
A novel microfabrication technique was developed to create silicon nanowires (SiNWs) on orthogonal surfaces of microchannels machined on top of a silicon wafer. Using a two-step metal-assisted etching process, the SiNW for the first time could be selectively fabricated on two different crystalline directions—the channel top and bottom surfaces oriented in the (1 0 0) direction while the sidewal...
متن کاملAnalysis of pool boiling heat transfer over porous surfaces
A semi-empirical model for pool boiling over porous surfaces is presented. The pressure drop across the porous surface is estimated using Darcy 's law. The signi®cance of the latent heat ̄ux contribution for highly porous surfaces is examined. Two nucleation factors are de®ned and correlated in terms of measurable quantities using literature data. An expression for the total heat ̄ux in terms o...
متن کاملEffect of open microchannel geometry on pool boiling enhancement
Pool boiling enhancement through surface modification has garnered the attention of many researchers for extending the limits of heat flux dissipation. Simulated copper chips were used in a pool boiling setup with water boiling at atmospheric pressure. Heat transfer performance of different microchanneled surfaces was compared to that of a plain surface. The results of the study showed that the...
متن کاملPool boiling from GEWA surfaces in water and R-113
This reproduction was made from a copy of a manuscript sent to us for publication and microfilming. While the most advanced technology has been used to pho tograph and reproduce this manuscript, the quality of the reproduction is heavily dependent upon the quality of the material submitted. Pages in any manuscript may have indistinct print. In all cases the best available copy has been filmed....
متن کاملRoughness Effects on Nucleate Pool Boiling of R-113 on Horizontal Circular Copper Surfaces
The present paper is an experimental investigation of roughness effects on nucleate pool boiling of refrigerant R113 on horizontal circular copper surfaces. The copper samples were treated by different sand paper grit sizes to achieve different surface roughness. The average surface roughness of the four samples was 0.901, 0.735, 0.65, and 0.09, respectively. The experiments were performed in t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Heat Transfer Engineering
سال: 2018
ISSN: 0145-7632,1521-0537
DOI: 10.1080/01457632.2018.1442310