Effect of Minor Titanium Addition on Copper/Diamond Composites Prepared by Hot Forging
نویسندگان
چکیده
منابع مشابه
Effect of Titanium Addition on the Thermal Properties of Diamond/Cu-Ti Composites Fabricated by Pressureless Liquid-Phase Sintering Technique
In this study, minor-addition elements such as Si, Co, Cr, W, Mo, and Ti were added to matrix to improve the wettability between the diamonds and Cu matrix. The pressureless liquid-phase sintering technique adopted in this study provides a low-cost method for producing diamond/Cu composites with high potential for industrial mass production. Thermal properties of the diamond/Cu-Ti composites fa...
متن کاملthe effect of consciousness-raising activities on learning grammatical structures by iranian guidance school efl learners
abstract the first purpose of this study was to investigate the effect of consciousness-raising (c-r) activities on learning grammatical structures (simple present tense in this case) by iranian guidance school efl learners. the second one was to investigate the effect of gender on learning the simple present tense through c-r activities and tasks. finally, this study aimed to investigate the ...
Effect of Lcp Addition on the Properties of Hybrid Composites
A hybrid composite consisting of rubber toughened nylon 6,6, glass fiber and LCP was investigated by varying LCP content. The hybrid system exhibited better processability than the glass fiber reinforced composite. A decrease in the total torque was observed with the LCP content indicating the reduction in the energy consumed during the processing of the hybrid composites. Thermal stability of ...
متن کاملeffect of oral presentation on development of l2 learners grammar
this experimental study has been conducted to test the effect of oral presentation on the development of l2 learners grammar. but this oral presentation is not merely a deductive instruction of grammatical points, in this presentation two hypotheses of krashen (input and low filter hypotheses), stevicks viewpoints on grammar explanation and correction and widdowsons opinion on limited use of l1...
15 صفحه اولTHE EFFECT OF COBALT ADDITIVE ON MICROSTRUCTURE AND PROPERTIES OF W-CU COMPOSITES PREPARED BY SINTERING AND INFILTRATION PROCESSES
In the present paper, the influence of cobalt additive on the sintering/infiltration behavior of W-Cu composite was studied. For this purpose, the mixed powders of tungsten and cobalt were compacted by CIP method and then sintered at 1450, 1550 and 1600 °C in a hydrogen atmosphere. The sintered specimens at 1550 °C were subsequently infiltrated with liquid copper at 1250 °C for 10, 60 and 1...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JOM
سال: 2018
ISSN: 1047-4838,1543-1851
DOI: 10.1007/s11837-018-2815-2