Effect of milling modes on surface integrity of KDP crystal processed by micro ball-end milling
نویسندگان
چکیده
منابع مشابه
Review of Micro-Particles of Hydroxyapatite Nanoparticles by Ball Milling
Hydroxyapatite (HA) is the most important bioactive ceramics because of biocompatibility and structural similarity to the mineral part of bones and teeth of broad clinical application in the field of dentistry, orthopedic and coatings are Biomaterials. The aim of this study was to construct nano-hydroxyapatite micro particles using calcite, silica and zinc oxide using ball milling, powder, thes...
متن کاملAnalysis of Chatter in Ball End Milling by Wavelet Transform
The chatter is one of the major limitations of the productivity in the ball end milling process. It affects the surface roughness, the dimensional accuracy and the tool life. The aim of this research is to propose the new system to detect the chatter during the ball end milling process by using the wavelet transform. The proposed method is implemented on the 5-axis CNC machining center and the ...
متن کاملFabrication of Microfluidic Channel Using Micro End Milling and Micro Electrical Discharge Milling
This paper discusses the fabrication of microfluidic channels using micro end milling and micro electrical discharge (ED) milling on metals and polymers. The width of the microchannels fabricated by micro end milling was 100-800 μm with 1-2 aspect ratio. The average surface roughness values were 100-200 nm and 80-120 nm on metals and polymers respectively. The end milling was found to form more...
متن کاملMechanochemical decomposition of pentachlorophenol by ball milling.
The mechanochemical dechlorination of pentachlorophenol (PCP) was studied using CaO and SiO2 powder as additives. The effects of the milling time and additives on the dechlorination rate were investigated. The resulting product was characterized by X-ray diffraction (XRD), Fourier transform infrared spectra (FT-IR), thermogravimetric analysis (TG) and ion chromatography (IC). It is found that g...
متن کاملSurface topography in ball end milling process: Description of a 3D surface roughness parameter
In the field of free-form machining, CAM software offers various modes of tool-path generation, depending on the geometry of the surface to be machined. Manufactured surface quality results from the choice of machining strategy and machining parameters. The objective of this paper is to provide a 3D surface roughness parameter that formalizes the relative influence of both machining parameters ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia CIRP
سال: 2018
ISSN: 2212-8271
DOI: 10.1016/j.procir.2018.05.060