Effect of microstructural factors on tensile properties of ECAE-processed AZ31 magnesium alloy.

Quasi-Static and Dynamic Characterization of Equal Channel Angular Extrusion (ECAE) –Processed and Rolled AZ31 Magnesium Alloy Sheet

Influence of Accumulative Roll Bonding on the Texture and Tensile Properties of an AZ31 Magnesium Alloy Sheets

Deformation behaviour of rolled AZ31 sheets that were subjected to the accumulative roll bonding was investigated. Substantially refined microstructure of samples was achieved after the first and second pass through the rolling mill. Sheets texture was investigated using an X-ray diffractometer. Samples for tensile tests were cut either parallel or perpendicular to the rolling direction. Tensil...

Effect of Microstructural Variations on the Tensile and Fracture Toughness Properties of Alloy 718 Welds

The effect of microstructural variations on the tensile and fracture toughness properties of Alloy 718 welds is reviewed. The microstructural parameters surveyed include heat treatment, longterm thermal aging and neutron irradiation. The two heat treatments that were characterized include the conventional heat treatment, per ASTM B637, and a modified heat treatment designed to improve the tough...

Effect of Temperature on Diffusion-Bonded Joint of AZ31 Magnesium and 7075 Aluminum Alloy

In this study, the effect of temperature on the diffusion welding of AZ31 magnesium alloy and 7075 aluminum was discussed. Diffusion welding temperature was the most important parameter since all mechanisms are sensitive to temperature in Diffusion welding method. Intrusive contacts between the two alloys at temperatures of 430, and 440 °C 450 and took 60 min. In all tests constant pressure and...

Effect of Temperature on Diffusion-Bonded Joint of AZ31 Magnesium and 7075 Aluminum Alloy

In this study, the effect of temperature on the diffusion welding of AZ31 magnesium alloy and 7075 aluminum was discussed. Diffusion welding temperature was the most important parameter since all mechanisms are sensitive to temperature in Diffusion welding method. Intrusive contacts between the two alloys at temperatures of 430, and 440 °C 450 and took 60 min. In all tests constant pressure and...