Effect of Micro-Alloying Elements on Deformation Behavior in Mg–Y Binary Alloys

Effect of Alloying Elements on the Microstructure and Mechanical Properties of Austempered Ductile Iron Alloys

Effect of Alloying Elements on the Microstructure and Mechanical Properties of Austempered Ductile Iron Alloys

The Role of Alloying Elements on the Crevice Corrosion Behavior of Ni-Cr-Mo Alloys

The roles of the alloying elements Mo, Cr, and W in resisting crevice corrosion of UNS N06022, UNS N06625, and UNS N10362 have been studied under galvanostatic conditions in 5 mol/L NaCl at 150°C. Corrosion damage patterns were investigated using surface analytical techniques such as scanning electron microscopy and optical imaging, and the corrosion products characterized by energy dispersive ...

EFFECT OF HEAT TREATMENT AND ALLOYING ELEMENTS ON PRECIPITATION AND SURFACE BEHAVIOR OF Co-Cr-Mo ALLOYS

The microstructures of as-cast and heat-treated Co-Cr-Mo with addition of C, Si and Mn have been investigated with a focus on phase and dissolution of precipitates. The heat treatment temperatures and heating periods employed ranged from 1448 to 1548 K and 0 to 43.2 ks, respectively. The precipitates observed in the as-cast and heat-treated alloys were carbides (M23C6, eta-phase, and pi-phase) ...

Corrigendum: Development of biodegradable Zn-1X binary alloys with nutrient alloying elements Mg, Ca and Sr

This Article contains an error in Fig. 2f; the compression curves were incorrectly plotted and labelled. The correct Fig. 2f appears below as Fig. 1. Figure 1.