Effect of Intercritical Quenching on Mechanical Properties of Cu-containing Low Alloy Steel
نویسندگان
چکیده
منابع مشابه
Evaluation of microstructure and mechanical properties of 410NiMo as an overlay layer on low alloy steel
The aim of this study is to reach an increased service life for parts using in sour environment by weld overlaying process. In this investigation, two successive layers of ER410NiMo were clad on low alloy steel substrates. To reduce the likelihood of Hydrogen Induced Cracking (HIC) and producing stable hydrogen traps, Post Weld Heat Treatment (PWHT) was conducted. Microstructural analysis, X-ra...
متن کاملEvaluation of microstructure and mechanical properties of 410NiMo as an overlay layer on low alloy steel
The aim of this study is to reach an increased service life for parts using in sour environment by weld overlaying process. In this investigation, two successive layers of ER410NiMo were clad on low alloy steel substrates. To reduce the likelihood of Hydrogen Induced Cracking (HIC) and producing stable hydrogen traps, Post Weld Heat Treatment (PWHT) was conducted. Microstructural analysis, X-ra...
متن کاملEffect of Heat Treatment Parameters on the Mechanical and Microstructure Properties of Low-Alloy Steel
This study examines the effect of heat treatment at three different temperatures of 800 ̊C, 950 ̊C and 1100 ̊C on the microstructure and mechanical properties of low-alloy steel with an addition of manganese, chrome and lead. To determine an impact of the applied heat treatment operations, testing of mechanical properties and microstructural examinations of the steel with 0.23%, 0.24%, 0.29% and 0...
متن کاملEFFECT OF CONTROLLED QUENCHING ON THE AGING OF 2024 ALUMINUM ALLOY CONTAINING BORON
The presence of alloying elements, sometimes in a very small amount, affects mechanical properties one of these elements is Boron. In Aluminum industries, Boron master alloy is widely used as a grain refiner In this research, the production process of Aluminum –Boron master alloy was studied at first then, it was concurrently added to 2024 Aluminum alloy. After rolling and homogenizing the resu...
متن کاملmicrostructure and mechanical properties of a low alloy high carbon steel processed by quenching and partitioning process
the quenching and partitioning (q&p;) process is a new heat treatment cycle to produce the third generation of advanced high strength steels based on diffusion of carbon from martensite to retained austenite phase. the application of this process for various steels leads to a remarkable combination of mechanical properties including high strength and good ductility. using this process in automo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 2017
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane.tetsu-2017-006