Effect of Inlet Cooling Water Temperature on Condenser Vaccum
نویسندگان
چکیده
منابع مشابه
Analysis and Simulation of the Effect of Turbine Inlet Temperature on Thermodynamic Performance of the Water – Ammonia Combined Cycle
Due to the importance of power generation cycles including combined cycle, many studies have been done in recent years and many researchers have been tried to optimize these cycles by using of existing methods. In this study, the Water-Ammonia cycle is investigated in the combined-cycle of the Water-Ammonia, working dual Water-Ammonia mixture is used as the works fluid. This cycle can be used f...
متن کاملInfluences of Temperature of Vapour-Condenser and Pressure in the Vacuum Chamber on the Cooling Rate during Vacuum Cooling
The temperature of vapour-condenser below 0°C and the final pressure in the vacuum chamber below 0.61kPa during vacuum cooling were experimentally analysed in this paper. The temperature of vapour-condenser, -2 °C, -35°C, -39°C and -71°C, and the final pressure in the vacuum chamber, 0.3kPa, 0.4kPa, 0.5kPa and 0.61kPa, were chosen. The experimental results showed that the cooling rate varies wi...
متن کاملeffect of oral presentation on development of l2 learners grammar
this experimental study has been conducted to test the effect of oral presentation on the development of l2 learners grammar. but this oral presentation is not merely a deductive instruction of grammatical points, in this presentation two hypotheses of krashen (input and low filter hypotheses), stevicks viewpoints on grammar explanation and correction and widdowsons opinion on limited use of l1...
15 صفحه اولEffect of water temperature on cooling efficiency during hyperthermia in humans.
We evaluated the cooling rate of hyperthermic subjects, as measured by rectal temperature (T(re)), during immersion in a range of water temperatures. On 4 separate days, seven subjects (4 men, 3 women) exercised at 65% maximal oxygen consumption at an ambient temperature of 39 degrees C until T(re) increased to 40 degrees C (45.4 +/- 4.1 min). After exercise, the subjects were immersed in a cir...
متن کاملCooling Effect of Water Injection on a High-Temperature Supersonic Jet
The high temperature and high pressure supersonic jet is one of the key problems in the design of solid rocket motors. To reduce the jet temperature and noise, cooling water is typically injected into the exhaust plume. Numerical simulations for the gas-liquid multiphase flow field with mixture multiphase model were developed and a series of experiments were carried out. By introducing the ener...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JOURNAL OF THE MARINE ENGINEERING SOCIETY IN JAPAN
سال: 1969
ISSN: 0388-3051,1884-4758
DOI: 10.5988/jime1966.4.35