Effect of Immersion in Warm Water on Bonding Strength between Autopolymerizing Resin and Denture Base Resin
نویسندگان
چکیده
منابع مشابه
Bonding of Acrylic Resin Teeth with Denture Base Resin
The debonding of acrylic resin teeth with the denture base resin has been related to several different factors of which contamination of the bonding surfaces with wax has been suggested as the major cause. The purpose of this study was to determine the efficient method of wax removal from denture teeth using hot water at different temperatures ranges. Acrylic rods were used as tooth analogues a...
متن کاملA Comparative Evaluation of Effect of Reinforced Autopolymerizing Resin on the Flexural Strength of Repaired Heat-polymerized Denture Base Resin before and after Thermocycling
Aims and Objective Denture fractures are a common problem in clinical practice. Despite the use of different reinforcement materials (metal wires, metal plates, and various types of fibers) for denture repairs, recurrent fractures are still common. The purpose of this study was to compare the maximum flexural loads of the heat-polymerized denture base resin when repaired with autopolymerizing r...
متن کاملEffect of adhesive primers on bonding strength of heat cure denture base resin to cast titanium and cobalt-chromium alloy
STATEMENT OF PROBLEM The poor chemical bonding of a denture base resin to cast titanium framework often introduces adhesive failure and increases microleakage. PURPOSE This study evaluated the shear bond strengths of a heat cure denture base resin to commercially pure titanium, Ti-6Al-4V alloy and a cobalt-chromium alloy using two adhesive primers. MATERIAL AND METHODS Disks of commercially...
متن کاملEffect of repair resin type and surface treatment on the repair strength of polyamide denture base resin.
The purpose of the present study was to evaluate the effects of different repair resins and surface treatments on the repair strength of a polyamide denture base material. Polyamide resin specimens were prepared and divided into nine groups according to the surface treatments and repair materials. The flexural strengths were measured with a 3-point bending test. Data were analyzed with a 2-way ...
متن کاملEffect of disinfectant solutions on a denture base acrylic resin.
The aim of this study was to evaluate the hardness, roughness and mass loss of an acrylic denture base resin after in vitro exposure to four disinfectant solutions. Forty specimens (Clássico, Brazil) were prepared and randomly assigned to 4 groups n = 10) according to the disinfectant solution: G1: control, stored in distilled water at 37 degrees C; G2: 1% sodium hypochlorite; G3: 2% glutaralde...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Prosthodontic Research & Practice
سال: 2006
ISSN: 1347-7021
DOI: 10.2186/prp.5.161