Effect of Hydrothermal Ageing on Glass Fibre Reinforced Plastic (GFRP) Composite Laminates exposed to Water and Salt Water
نویسندگان
چکیده
منابع مشابه
Machinability of glass fiber reinforced plastic (GFRP) composite materials
This paper deals with the study of machinability of GFRP composite tubes of different fiber orientation angle vary from 30 to 90. Machining studies were carried out on an all geared lathe using three different cutting tools: namely Carbide (K-20), Cubic Boron Nitride (CBN) and Poly-Crystalline Diamond (PCD). Experiments were conducted based on the established Taguchi’s Design of Experiments (DO...
متن کاملMachining of Fibre Reinforced Plastic Composite Materials
Fibre reinforced plastic composite materials are difficult to machine because of the anisotropy and inhomogeneity characterizing their microstructure and the abrasiveness of their reinforcement components. During machining, very rapid cutting tool wear development is experienced, and surface integrity damage is often produced in the machined parts. An accurate selection of the proper tool and m...
متن کاملMechanical and Impact Properties of Untreated Jute Fabric Reinforced Polyester Laminates Compared with Different E- Glass Fibre Reinforced Laminates
In recent years, the improvement of properties of natural fibre reinforced laminates over the pure polymeric matrix has been thoroughly investigated with the aim of providing a possible replacement of E-glass fibre reinforced composites for some large-volume applications. In the present study, the properties of a jute/polyester laminate are compared with those yielded by two E-glass fibre woven...
متن کاملEffects of Different Parameters on Delamination Factor of Glass Fiber Reinforced Plastic (GFRP)
The experimental investigations of the delamination factor of glass fiber reinforced plastic at different cutting parameters are reported in this study. This paper has involved the determination of different factors affecting the hole quality and cause of delamination in a glass fiber reinforced plastic. The various process parameters like different twist drill bits of different materails, diff...
متن کاملCharacterization of Glass Fibre – Coconut Coir– Human Hair Hybrid Composites
A composite material is a combination of two or more materials arranged in the form of layer one on the other layer using binding material through some prescribed methods. In the Glass fibre coconut fibre human hair hybrid composite method, the epoxy resin is used as binding material, in which one layer is formed of glass fibre, followed by coconut fibre and then by human hair. By using hand la...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Current Engineering and Technology
سال: 2010
ISSN: 2277-4106
DOI: 10.14741/ijcet/spl.2.2014.10