Effect of Hybrid Fillers of Bamboo Fiber and Commercial Glass Fiber on High Density Polyethylene Matrix
نویسندگان
چکیده
The focus of this research work is to study the effect hybrid fillers bamboo fiber and commercial glass on high density polyethylene (HDPE) matrix without interfacial coupling agent. composite was formed through melt blending method using two-roll mixing mill at temperature 160 oC shaped compression molding machine. highest value Tensile Modulus break Hardness were obtained ratio 70 % HDPE/ 15 bamboo/ particles (H/B15/G15). However, inclusion did not show any significant difference in Impact strength from molded blank HDPE samples (H/B0/G0) while percentage water absorbed by predominantly decreased as content filler increase matrix.
منابع مشابه
Creep Analysis of Bamboo High-Density Polyethylene Composites: Effect of Interfacial Treatment and Fiber Loading Level
The effect of chemical treatment at fiber–plastic interface and fiber loading level on creep property of bamboo fiber high-density polyethylene (BF/HDPE) composites was investigated. For single modifier systems, the use of maleic anhydride grafted polyethylene (PE-g-MA) as a coupling agent helped reduce the creep and achieved the optimum effect at the 5.7% loading level. The addition of either ...
متن کاملBamboo–Fiber Filled High Density Polyethylene Composites: Effect of Coupling Treatment and Nanoclay
High density polyethylene (HDPE)/bamboo composites with different nanoclay and maleated polyethylene (MAPE) contents were fabricated by melt compounding. The compounding characteristics, clay dispersion, HDPE crystallization, and mechanical properties of the composites were studied. The equilibrium torque during compounding decreased with use of clay masterbatch and increased with the addition ...
متن کاملWater Absorption Properties of Heat-Treated Bamboo Fiber and High Density Polyethylene Composites
To modify water absorption properties of bamboo fiber (BF) and high density polyethylene (HDPE) composites, heat treatment of BFs was performed prior to compounding them with HDPE to form the composites. The moisture sorption property of the composites was measured and their diffusion coefficients (Dm) were evaluated using a one-dimensional diffusion model. Moisture diffusion coefficient values...
متن کاملRice straw fiber-reinforced high-density polyethylene composite: Effect of fiber type and loading
Composite panels using virgin and recycled high-density polyethylene (VHDPE and RHDPE) and five types of natural fibers including four rice straw components (i.e., rice husk, rice straw leaf, rice straw stem, and whole rice straw) and wood fiber as control were made by melt compounding and compression molding. Fiber characteristics and the influences of fiber type and loading rate on HDPE cryst...
متن کاملDamage Assessment in Glass Fiber-Epoxy Matrix Composite under High Velocity Impact of Ice
This study investigated the influence of nanoclay on the impact damage resistance of glass fiber-epoxy composites under high velocity ice impact loading. Addition of 0.5 wt. % nanoclay into epoxy was shown to improve damage resistance compared to composite plates having no nanoclay platelet. The glass fiber-epoxy composites containing nanoclay brought about substantial improvement in ice impact...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of applied science and environmental management
سال: 2022
ISSN: ['2659-1502', '2659-1499']
DOI: https://doi.org/10.4314/jasem.v26i5.2