Effect of H2 produced through steam methane reforming on CHP plant efficiency

Porosity effect on ZrO2 hollow shell and hydrothermal stability for catalytic steam reforming of methane

catalytic steam reforming of methane Zi-Yian Lim, Chunzheng Wu, Wei Guo Wang, Kwang-Leong Choy, and Hongfeng Yin a Ningbo Institute of Material Technology and Engineering, 519 Zhuangshi Road, Zhenhai District, Ningbo 315201, China. E-mail: [email protected] b University of Nottingham, Ningbo China, 199 Taikang East Road, University Park, Ningbo 315100, China. E-mail: [email protected] c...

Production of hydrogen by unmixed steam reforming of methane

CFD-simulation of membrane reactor for methane steam reforming

A membrane reactor is a reaction system that provides higher productivity and lower separation cost in chemical reaction processes. In this paper, packed bed catalytic membrane reactor with palladium membrane for methane steam reforming was analyzed both experimentally and numerically. The numerical model consists of a full set of partial differential equations derived from conservation of mass...

CFD modeling and control of a steam methane reforming reactor

This work initially focuses on developing a computational fluid dynamics (CFD) model of an industrialscale steam methane reforming reactor (reforming tube) used to produce hydrogen. Subsequently, we design and evaluate three different feedback control schemes to drive the area-weighted average hydrogen mole fraction measured at the reforming tube outlet ( x̄H outlet 2 ) to a desired set-point va...

analysis and simulation of severe accidents in a steam methane reforming plant

severe accidents of process industries in iran have increased significantly in recent decade. this study quantitatively analyzes the hazards of severe accidents imposed on people, equipment and building by a hydrogen production facility. a hazard identification method was applied. then a consequence simulation was carried out using phast 6.54 software package and at the end, consequence evaluat...