Effect of Foaming Agent and Endothermic Agent Addition on Foaming Behavior of NiTi Alloy Made by Combustion Synthesis

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of Elemental Powder Size on Foaming Behavior of NiTi Alloy Made by Combustion Synthesis

Nickel titanium (NiTi) foams were made by combustion synthesis of powders with the help of ZrH2 as foaming agent and TiB2 as endothermic agent. In this paper, we investigated the effect of elemental powder size on the foaming. The powder size of Ni and Ti affected the ignition temperature of the combustion reaction, cell morphology and microstructure of the foams. The cell morphology of the foa...

متن کامل

Fly Ash-based Geopolymer Lightweight Concrete Using Foaming Agent

In this paper, we report the results of our investigation on the possibility of producing foam concrete by using a geopolymer system. Class C fly ash was mixed with an alkaline activator solution (a mixture of sodium silicate and NaOH), and foam was added to the geopolymeric mixture to produce lightweight concrete. The NaOH solution was prepared by dilute NaOH pellets with distilled water. The ...

متن کامل

Foaming Control in Activated Sludge Treatment Plants by Coagulants Addition

This paper presents the results of an investigation that aimed to evaluate the efficiency of various inorganic coagulants and organic polymers to combat filamentous foaming and bulking problems, caused by the proliferation of M. parvicella and/or Gordona amarae. The duration of the investigation covered 14 months. During this period foam samples were taken from the aeration basins of two full-s...

متن کامل

Foaming Effect on Random Packing Performance

The effect of foaming on the performance of 16 mm Pall rings was determined in a 0.15 m distillation column with a ‘bed depth of 1.23 m. The tests were conducted with the methanol/water system at 1.0 bar pressure. A controllable foaming inside the packed bed was generated successfully with the addition of the surfactant, Triton X-100, to the reflux stream. The performance of the packing with an...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of the Japan Institute of Metals

سال: 2011

ISSN: 1880-6880,0021-4876

DOI: 10.2320/jinstmet.75.379