Effect of flyash particles with aluminium melt on the wear of aluminium metal matrix composites
نویسندگان
چکیده
منابع مشابه
Particle effects on friction and wear of aluminium matrix composites
Particle effects on friction and wear of 6061 aluminium (6061 AI) reinforced with silicon carbide (SIC) and alumina (AI203) particles were investigated by means of Vickers microhardness measurements and scratch tests. Unreinforced 6061 AI matrix alloy was also studied for comparison. To explore the effect of heat treatment, materials subjected to three different heat treatment conditions, i.e. ...
متن کاملGrinding of Aluminium-Based Metal Matrix Composites Reinforced with Al2O3 or SiC Particles
This paper presents results obtained from the grinding of aluminium-based metal matrix composites reinforced with either aluminium oxide (Al2O3) or silicon carbide (SiC) particles using grinding wheels made of SiC in a vitrified matrix or diamond in a resin-bonded matrix. The study used grinding speeds of 1100–2200 m min , a grinding depth of 15 m for rough grinding and 0.1–1 m for fine grindin...
متن کاملWear behaviour of AA6061 aluminium alloy and its composites
This study investigates the wear resistance of four AA6061 MMCs together with the monolithic AA6061 alloy, all in the T6 condition, using a pin-on-disc test. In addition to the widely studied 20 vol.% Saffil MMCs, the present investigation considered a hybrid of 11% Saffil + 20% Sic, and a high volume fraction Sic, MMC. AA6061 + 60% Sic,. The wear behaviour against P400 Sic grit adhesive bonded...
متن کاملMinimization of Burr Height and Tool Wear in Drilling of Aluminium Metal Matrix Composites Using Desirable-Fuzzy Approach
This paper is focused on minimization of the burr height and Tool wear in drilling of Aluminium Metal Matrix Composites(AMMC) using “Desirable-Fuzzy” approach, which is developed by combining the Desirability Function Analysis and Fuzzy Logic. AMMC samples are prepared based on selected material parameters and drilling experiments are conducted on these samples as per Taguchi OA L27 which is de...
متن کاملA Review on Conventional and Laser Assisted Machining of Aluminium Based Metal Matrix Composites
Article history: Received: 27.6.2013. Received in revised form: 14.11.2013. Accepted: 19.11.2013. Aluminum based Metal Matrix Composites (AlMMC) have been found in different industrial applications due to their excellent properties compared to conventional materials. Machining of these composites is difficult due to their hard particle reinforcements. The wider usage of these composites is limi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Engineering Science and Technology, an International Journal
سال: 2017
ISSN: 2215-0986
DOI: 10.1016/j.jestch.2017.08.004