Effect of Fluorine Incorporation on DLC Films Deposited by Pulsed Cathodic Arc Deposition on Nitrile Butadiene Rubber and Polyurethane Rubber Substrates
نویسندگان
چکیده
منابع مشابه
Evaluation of tribological properties of (Ti,Al)CN/DLC composite coatings deposited by cathodic arc method.
In this study, Ti, Al and N doped DLC – referred to here after as “(Ti,Al)CN/DLC composite”- coating and pure diamond-like coating (DLC) were produced by cathodic arc deposition technique and the effects of the coating thickness on their tribological properties were evaluated. The coatings were characterized, using scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffrac...
متن کاملEffect Of Bipolar Pulsed Voltage On Properties Of DLC Films Deposited By Inductively Coupled PECVD
Diamond-like carbon (DLC) is a metastable form of amorphous carbon having large sp 3 bonding. DLC films have unique properties such as high hardness, low-friction, good transparency in IR region, chemical inertness and biocompatibility. To have better performance of the coating one should have proper selection of different parameters for deposition. In the present study, DLC films were deposite...
متن کاملComparison of Properties of Ti/TiN/TiCN/TiAlN Film Deposited by Cathodic Arc Physical Vapor and Plasma-assisted Chemical Vapor Deposition on Custom 450 Steel Substrates
This study investigated the effects of deposition techniques on the microstructural and tribological properties of Ti/TiN/TiCN/TiAlN multilayer coatings onto a Custom 450 steel substrate. The coatings were produced using cathodic arc physical vapor deposition (CAPVD) and plasma-assisted chemical vapor deposition (PACVD). The microstructural of the coatings was evaluated using (SEM), and phase f...
متن کاملMacroparticles in films deposited by steered cathodic arc
The macroparticle content of titanium films deposited using a steered vacuum cathodic arc has been investigated. It has been found that the macroparticle number decreases with increasing steering magnetic field strength, and experimental results are found to be consistent with the model in which the number and mass of macroparticles arising from a cathode spot are proportional to the cathode sp...
متن کاملDeposition of permalloy films by filtered cathodic vacuum arc
The filtered cathodic vacuum arc technique was employed to deposit magnetic films such as FeNi on silicon substrate. Using the normal cathode design, tetrahedral amorphous carbon and metals films can be deposited. If a magnetic target is used, the arc spot always preferably moves to the edge of the target and then extinguishes. Therefore, the arc is not stable and no film can be deposited. A ca...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Coatings
سال: 2020
ISSN: 2079-6412
DOI: 10.3390/coatings10090878