Effect of Film Elastic Modulus on Fatigue Behavior of Wrought Magnesium Alloy AZ61 Coated with DLC Film
نویسندگان
چکیده
منابع مشابه
Effect of Stress Ratio on Fatigue Crack Growth Behavior of Magnesium Alloy AZ61 under 3.5 Mass% NaCl Spray Environment*
Fatigue crack growth behavior of AZ61 magnesium alloy was investigated in low humidity (55% relative humidity) and 3.5% NaCl spray environments under various stress ratios. Fatigue crack growth rates became higher with increasing load ratio for both environments. However, the results of fatigue crack growth test under 3.5% NaCl spray environment showed lower fatigue crack propagation rate compa...
متن کاملInvestigating the fretting fatigue life of thin film titanium nitride coated aerospace Al7075-T6 alloy
Application of surface modification methods is expected to be a supreme solution to diminishing fretting damage. In this study, our aim was to improve the fretting fatigue life of Al7075-T6 alloy by covering it with a TiN thin film hard coating using the magnetron sputtering technique. Coated specimens with the best surface hardness, adhesion strength and roughness were tested with a rotating b...
متن کاملEffect of C2h2 Flow Rate on the Deposition of Ti-tic-tic/dlc Gradient Nano-composite Film on Niti Alloy
Ti-TiC-TiC/DLC gradient nano-composite films have been prepared on the NiTi substrates by the technique of plasma immersion ion implantation and deposition (PIIID) combining with plasmaenhanced chemical vapor deposition (PECVD). The influence of C2H2 flow rate ranging from 30sccm to 50sccm on the chemical structure, microstructure, mechanical properties and corrosion resistance of resulting thi...
متن کاملThe Effect of Core Surface Tension on Roughness of Film - Coated Tablets
The arithmetic mean roughness, Ra, values were determined by scanning electron microscopic technique of different core models (furazolidone, nitrofurantoin and acetyl salicylic acid), coated by HPMC film forming solution containing 10 wt% of various molecular weight PEGs. The results showed that both plasticizer molecular weight and core surface free energy could have a significant influence on...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 2012
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.78.403