Effect of fiber volume fraction on tensile strength and fracture analysis of corn husk reinforced epoxy resin composite

نویسندگان

چکیده

This study aims to determine the effect of volume fraction corn husk fiber as reinforcement in epoxy matrix composites on tensile strength and fracture analysis specimens. used a variation 20%, 30%, 40%, 50% by using Vacuum Assisted Resin Infusion (VARI) method. Tensile testing patterns were carried out mechanical properties material. The results showed that addition reinforced resin composite could increase value. values for length 165 mm with variations get stress 26.16 N/mm2, 27.09 27.82 30.61 N/mm2. mechanism pull out, debonding, rich also occurs microstructure test results.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of TEOS Electrospun Nanofiber Modified Resin on Interlaminar Shear Strength of Glass Fiber/Epoxy Composite

Interlaminar shear strength (ILSS) of fiber reinforced polymer composite is an important property for most of the structural applications. Matrix modification is an effective method used to improve the interlaminar shear strength of composite. In this paper, EPON 862/w epoxy system was modified using Tetraethyl orthosilicate (TEOS) electrospun nanofibers (ENFs) which were produced using electro...

متن کامل

Investigation of influence of tab types on tensile strength of E-glass/epoxy fiber reinforced composite materials

Mechanical response of E-glass/epoxy fiber reinforced composite was investigated in tensile loading. Different types of tabs were considered in order to evaluate their effects on the tensile strength of material. Specifically, two types of molded tabs and five types of bonded tabs were considered in the study. The influence of different amount of gripping pressures on failure mode and on tensil...

متن کامل

Effect of silane activation on shear bond strength of fiber-reinforced composite post to resin cement

PURPOSE Among the surface treatment methods suggested to enhance the adhesion of resin cement to fiber-reinforced composite posts, conflicting results have been obtained with silanization. In this study, the effects of silanization, heat activation after silanization, on the bond strength between fiber-reinforced composite post and resin cement were determined. MATERIALS AND METHODS Six group...

متن کامل

Short fiber reinforced composite: the effect of fiber length and volume fraction.

AIM The aim of this study was to determine the effect of short fiber volume fraction and fiber length on some mechanical properties of short fiber-reinforced composite (FRC). METHODS AND MATERIALS Test specimens (2 x 2 x 25 mm3) and (9.5 x 5.5 x 3 mm3) were made from short random FRC and prepared with different fiber volumes (0%-22%) and fiber lengths (1-6 mm). Control specimens did not conta...

متن کامل

Moisture Diffusion Properties of Fabric Composite (Glass Fiber/Epoxy Resin)

In this study, the effect of hygrothermal conditioning on the moisture diffusion properties of the fabric composite (glass fiber/epoxy resin) was investigated. The water uptake of the specimens conditioned in humid environment at different relative humidities (0, 60 and 96 % r.h) at constant temperature (60°C) was evaluated by weight gain measurements. The moisture diffusion properties of the f...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: MATEC web of conferences

سال: 2022

ISSN: ['2261-236X', '2274-7214']

DOI: https://doi.org/10.1051/matecconf/202237202005