Effect of Fe Content on Steady-State Grain Size in Ni-Fe Alloys
نویسندگان
چکیده
It is widely known that a steady-state grain size dss obtained by plastic deformation varies with change in physical properties of material, such as stacking fault energy ΓSFE, shear modulus G, flow stress σ and magnitude Burgers vector b. In previous study, model has been proposed based on dislocation theory to describe the relationship between properties. For pure metals, it reported variation follows model. alloys, although effect normalized ΓSFE/Gb investigated, other not well considered. this Ni-Fe alloys were controlled changing Fe content, High-pressure torsion (HPT) straining was investigated. became finer increasing content. This study revealed decrease follow model, which suggested only but also σ/G affects alloys. presumable suppresses recovery dislocations, inverse enhances introduction dislocation, leads
منابع مشابه
Ternary Ni-Fe-Co Alloys Nanowire Electrodeposition
Nanowire is a cylindrical nano-structure with nanometer dimensions. In this research, the studied nanowire was made from the magnetic triple Ni-Fe-Co alloy.
 We utilized ordered porous anodic aluminum oxide as a template for the nanowire deposition. The nanowire arrays were electrodeposited in the cylindrical pores of the oxide layer by AC potential in a simple sulfate bath. Then the relatio...
متن کاملTernary Ni-Fe-Co Alloys Nanowire Electrodeposition
Nanowire is a cylindrical nano-structure with nanometer dimensions. In this research, the studied nanowire was made from the magnetic triple Ni-Fe-Co alloy. We utilized ordered porous anodic aluminum oxide as a template for the nanowire deposition. The nanowire arrays were electrodeposited in the cylindrical pores of the oxide layer by AC potential in a simple sulfate bath. Then the relation ...
متن کاملMicroscopic structure of Fe-Ni and Fe-Ni-S molten alloys of geophysical interest
The static S(Q) liquid structure factors for binary FexNi12x , x50.90, 0.85, and ternary Fe0.85Ni0.05S0.15 molten alloys are investigated by means of the concurrent use of neutron diffraction and reverse Monte Carlo simulations. The measured G(r) radial distributions reveal atomic orderings varying from that present in the Fe0.90Ni0.10 alloy, reminiscent of the ideal bcc structure of solid Fe, ...
متن کاملCALCULATION OF THERMODYNAMIC PROPERTIES OF Al-Fe, Al-Ni AND Ni-Fe ALLOYS USING FACTSAGE
Thermodynamic predicting analysis of three binary systems Al-Fe, Al-Ni and Ni-Fe are shown in this paper. Thermodynamic analysis involved calculation of activities, coefficient of activities, partial and integral values for enthalpies and Gibbs energies of mixing and excess energies at three different temperatures: 1873K, 1900K and 1973K, as well as calculated phase diagrams, for the investigat...
متن کاملMÖSSBAUER EFFECT ON Fe-Pd ALLOYS
Mossbauer effect has been observed for disordered and ordered Fel-,Pdx alloys. The internal field and the quadrupole and isomer shifts were obtained. The asymmetrical spectrum for 0.45 < x < 0.75 and the temperature dependence of isomer shifts for x = 0.32 were interpreted as a distribution of the quadrupole field and a second order Doppler effect respectively. With respect to the invar effect ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nippon Kinzoku Gakkaishi
سال: 2022
ISSN: ['1880-6880', '0021-4876']
DOI: https://doi.org/10.2320/jinstmet.j2021047