Effect of Experimental Parameters on Reciprocating Wear Behavior of Al-Si-SiCp Composites under Dry Condition
نویسندگان
چکیده
منابع مشابه
Reciprocating wear test of dental composites: effect on the antagonist
Resin composites were first introduced as anterior restorative materials, but are more and more used in posterior teeth, as amalgam replacements. Nowadays the so-called ‘condensable’ composites are frequently used in posterior teeth. These materials are subjected to high values of contact and mastigatory loads, loading rates and sliding distances. In such contact conditions, wear is the major f...
متن کاملDevelopment of in-Situ Al-Si/CuAl2 Metal Matrix Composites: Microstructure, Hardness, and Wear Behavior
In the present work, in-situ metal matrix composites were fabricated through squeeze casting. The copper particles were dispersed with different weight percentages (3%, 6%, 10%, and 15%) into Al-12% Si piston alloy. Also, heat treatments were performed at 380 °C and 450 °C for holding times of 6 and 18 h. The microstructures, X-ray diffractometer (XRD) pattern, hardness, and wear characteristic...
متن کاملMechanism-Based FE Simulation of Tool Wear in Diamond Drilling of SiCp/Al Composites
The aim of this work is to analyze the micro mechanisms underlying the wear of macroscale tools during diamond machining of SiCp/Al6063 composites and to develop the mechanism-based diamond wear model in relation to the dominant wear behaviors. During drilling, high volume fraction SiCp/Al6063 composites containing Cu, the dominant wear mechanisms of diamond tool involve thermodynamically activ...
متن کاملWear behavior of Al-7%Si-0.3%Mg/melon shell ash particulate composites
The present study examined wear characteristics of A356/melon shell ash particulate composites. Dry-sliding the stainless steel ball against specimen disc revealed the abrasive wear behavior of the composites under loads of 2 and 5N. The composite showed lower wear rate of 2.182 × 10-4 mm3/Nm at 20 wt% reinforced material under load of 5N. Results showed that wear rate decreased significantly w...
متن کاملTHE EFFECT OF VARIOUS PARAMETERS ON DRY SLIDING WEAR BEHAVIOR AND SUBSURFACE OF AGED HYBRID METAL MATRIX COMPOSITES USING TAGUCHI TECHNIQUE
The effects of applied load, sliding speed and sliding distance on the dry sliding wear behavior of aged Al-SiCp-Gr composites were investigated. The specimen were fabricated by stir-casting technique. The pin-on-disc wear testing machine was used to investigate the wear rate by design of experiments based on L27 using Taguchi technique. Sliding distance was the most important variable that inf...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tribology Online
سال: 2009
ISSN: 1881-2198
DOI: 10.2474/trol.4.115