EFFECT OF CUTTING SPEED IN TURNING PROCESS USING FINITE ELEMENT MODELING
نویسندگان
چکیده
منابع مشابه
the effect of tool rake angle and cutting speed on cutting force during broaching process by using finite element modeling
0
متن کاملChip Formation Process using Finite Element Simulation “Influence of Cutting Speed Variation”
The main aim of this paper is to study the material removal phenomenon using the finite element method (FEM) analysis for orthogonal cutting, and the impact of cutting speed variation on the chip formation, stress and plastic deformation. We have explored different constitutive models describing the tool-workpiece interaction. The Johnson-Cook constitutive model with damage initiation and damag...
متن کاملEvaluation of Disc Cutter Performance in Rock Cutting Process Using 3D Finite Element Method
Today, numerical simulation can be used as a suitable tool to measure large quantities that are very expensive and, in some cases, impossible to measure. One of the important issues in predicting rock mass boreability in excavation with full face tunnel boring machines is estimating the discchr('39')s forces for rock cutting. For this purpose, the linear cutting test is employed. However, limi...
متن کاملFinite Element Modeling of Stresses Induced by High Speed Machining with round Edge Cutting Tools
High speed machining (HSM) produces parts with substantially higher fatigue strength; increased subsurface micro-hardness and plastic deformation, mostly due to the ploughing of the cutting tool associated with residual stresses, and can have far more superior surface properties than surfaces generated by grinding and polishing. In this paper, a dynamics explicit Arbitrary Lagrangian Eulerian (...
متن کاملFinite element modeling of 3 D turning of titanium
The finite element modeling and experimental validation of 3D turning of grade two commercially pure titanium are presented. The Third Wave AdvantEdge machining simulation software is applied for the finite element modeling. Machining experiments are conducted. The measured cutting forces and chip thickness are compared to finite element modeling results with good agreement. The effects of cutt...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Latest Trends in Engineering and Technology
سال: 2016
ISSN: 2278-621X
DOI: 10.21172/1.71.003