Effect of Cutting Fluids on Tool Wear in High Speed Cutting
نویسندگان
چکیده
منابع مشابه
Cutting-Tool Materials and Cutting Fluids
The reasons for the availability of a large variety of cutting-tool materials is best appreciated by reviewing the top eight parameters in the first column in Table 22.2 on p. 638. Among various factors, the type of workpiece material machined, the type of operation, and the surface finish and dimensional accuracy required all affect the choice of a cutting-tool material. For example, for inter...
متن کاملNeural Network Monitoring Strategy of Cutting Tool Wear of Horizontal High Speed Milling
The wear of cutting tool degrades the quality of the product in the manufacturing processes. The on line monitoring of the cutting tool wear level is very necessary to prevent the deterioration of the quality of machining. Unfortunately there is not a direct manner to measure the cutting tool wear on line. Consequently we must adopt an indirect method where wear will be estimated from the measu...
متن کاملInfluence of the Tool Edge Geometry on Specific Cutting Energy at High- Speed Cutting
This paper presents specific cutting energy measurements as a function of the cutting speed and tool cutting edge geometry. The experimental work was carried out on a vertical CNC machining center with 7,500 rpm spindle rotation and 7.5 kW power. Hardened steels ASTM H13 (50 HRC) were machined at conventional cutting speed and high-speed cutting (HSC). TiN coated carbides with seven different g...
متن کاملEvaluation of Flank Wear of Iron-rich Binder Carbide Cutting Tool in Turning of Titanium Alloy
Despite the fact that Titanium material has been considered as difficult to cut material, its usage has been increasing day by day in all engineering sectors; wherever criticality is encountered. Many studies are going on in view of increasing tool life at high cutting speed to improve productivity. In this study, attempt has been made to see the effect of iron as a partial substitution along ...
متن کاملCutting tool wear estimation for turning
The experimental investigation on cutting tool wear and a model for tool wear estimation is reported in this paper. The changes in the values of cutting forces, vibrations and acoustic emissions with cutting tool wear are recoded and analyzed. On the basis of experimental results a model is developed for tool wear estimation in turning operations using Adaptive Neuro fuzzy Inference system (ANF...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Precision Engineering
سال: 1964
ISSN: 0374-3543
DOI: 10.2493/jjspe1933.30.394