Effect of Circumferential Single Casing Groove Location on the Flow Stability under Tip-Clearance Effect in a Transonic Axial Flow Compressor Rotor

نویسندگان

چکیده

Numerical simulations have been performed to study the effect of circumferential single-grooved casing treatment (CT) at multiple locations on tip-flow stability and corresponding control mechanism three tip-clearance-size (TCS) schemes in a transonic axial flow compressor rotor. The results show that CT is more efficient when its groove located from 10% 40% tip chord, G2 (located near 20% chord) best scheme terms stall-margin improvement for TCS schemes. For effective CTs, tip-leakage-flow (TLF) intensity, entropy generation blockage are reduced, which makes interface between TLF mainstream move downstream. A quantitative analysis relative inlet angle indicates reduction incidence not necessary improve this may be different due distinction stall inception process. better application CT, blade profile should further modified by using an optimization method adjust shock position strength during design CT.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Numerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor

The effect of the tip gap size on the performance of a multistage axial compressor was studied by means of computational fluid dynamics (CFD). It was found that the performance of the compressor was very sensitive to the size of the tip gap. By increasing the gap size, the stall margin value, the total pressure ratio and the compressor efficiency reduced considerably. The flow field at the tip ...

متن کامل

A Numerical Investigation on the Unstable Flow in a Single Stage of an Axial Compressor

An unsteady two-dimensional finite-volume solver was developed based on Van Leer’s flux splitting algorithm in conjunction with “Monotonic Upstream Scheme for Conservation Laws (MUSCL)” limiters to improve the order of accuracy and the two-layer Baldwin-Lomax turbulence model was also implemented. Two test cases were prepared to validate the solver. The computed results were compared with the e...

متن کامل

Effects of Different Turbulence Models in Simulation of Unsteady Tip Leakage Flow in Axial Compressor Rotor Blades Row

Characteristics of rotor blade tip clearance flow in axial compressors can significantly affect their performance and stable operation. It may also increase blade vibrations and cause detrimental noises. Therefore, this paper is contributed to investigate tip leakage flow in a low speed isolated axial compressor rotor blades row. Simulations are carried out on near-stall condition, which is val...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Energies

سال: 2021

ISSN: ['1996-1073']

DOI: https://doi.org/10.3390/en14196143