Effect of CBC and G-POSS on Tribological Behaviour of Polyamide 6 and Short Glass Fiber Reinforced Polyamide 6 Composites
نویسندگان
چکیده
منابع مشابه
Effect of Fiber Surface Treatment on Wear Characteristics of Carbon Fiber Reinforced Polyamide 6 Composites
Ozone modification method and air-oxidation were used for the surface treatment of polyacrylonitrile(PAN)-based carbon fiber. The surface characteristics of carbon fibers were characterized by X-ray photoelectron spectroscopy (XPS). The interfacial properties of carbon fiber reinforced polyamide 6 (CF/PA6) composites were investigated by means of the single fiber pull-out tests. As a result...
متن کاملEffect of POSS and chain extender on tensile and fracture properties of neat and short glass fiber reinforced polyamide 6 composites
Polyamide 6 (PA6) and short glass fiber (SGF) reinforced PA6 composites toughened with glycidylisobutyl oligomeric silsesquioxane (G-POSS) and 1.10-carbonyl-bis-caprolactam (CBC) were prepared by meltextrusion compounding process and then compounds were formed to 2 mm thick double edge notched tension samples (DENT) by injection moulding process. Fracture properties of composites were analyzed ...
متن کاملeffect of fiber surface treatment on wear characteristics of carbon fiber reinforced polyamide 6 composites
ozone modification method and air-oxidation were used for the surface treatment of polyacrylonitrile(pan)-based carbon fiber. the surface characteristics of carbon fibers were characterized by x-ray photoelectron spectroscopy (xps). the interfacial properties of carbon fiber reinforced polyamide 6 (cf/pa6) composites were investigated by means of the single fiber pull-out tests. as a result, it...
متن کاملTribological and Mechanical Behaviors of Polyamide 6/Glass Fiber Composite Filled with Various Solid Lubricants
The effects of polytetrafluoroethylene (PTFE), graphite, ultrahigh molecular weight polyethylene (UHMWPE), and their compounds on mechanical and tribological properties of glass-fiber-reinforced polyamide 6 (PA6/GF) were studied. The polymeric materials were blended using twin-screw extruder and subsequently injection molded for test samples. Mechanical properties were investigated in terms of ...
متن کاملEffect of fiber content on flexural properties of glass fiber-reinforced polyamide-6 prepared by injection molding.
The use of non-metal clasp denture (NMCD) materials may seriously affect the remaining tissues because of the low rigidity of NMCD materials such as polyamides. The purpose of this study was to develop a high-rigidity glass fiber-reinforced thermoplastic (GFRTP) composed of E-glass fiber and polyamide-6 for NMCDs using an injection molding. The reinforcing effects of fiber on the flexural prope...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Physica Polonica A
سال: 2015
ISSN: 0587-4246,1898-794X
DOI: 10.12693/aphyspola.127.1121