Effect of boundary conditions and <i>n</i>-heptane on methyl decanoate HCCI combustion and emission based on two-stroke diesel engine

نویسندگان

چکیده

The initial boundary conditions, combustion, and emission characteristics of methyl decanoate (MD) mixed with different proportions n-heptane (N-Hep) for homogeneous charge compression ignition (HCCI) are studied in this work. MAN B&amp;W 6S70MC two-stroke diesel engine was used as the model reactor. results showed that, when equivalence ratio is 0.48, NO emissions MD N-Hep HCCI combustion process decrease temperature. temperature determined to be 380 K. At same time, increase pressure, pressure 1.3 atm. also indicate at a certain temperature, total mole fraction fuel, CO2, NOx reaction rates, reduced significantly percentage mixing combustion.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Active Combustion Control of Diesel HCCI Engine: Combustion Timing

We propose a model based control strategy to adapt the injection settings according to the air path dynamics on a Diesel HCCI engine. This approach complements existing airpath and fuelpath controllers, and aims at accurately controlling the start of combustion. For that purpose, start of injection is adjusted based on a Knock Integral Model and intake manifold conditions. Experimental results ...

متن کامل

effect of seed priming and irrigation regimes on yield,yield components and quality of safflowers cultivars

این مطالعه در سال 1386-87 در آزمایشگاه و مزرعه پژوهشی دانشگاه صنعتی اصفهان به منظور تعیین مناسب ترین تیمار بذری و ارزیابی اثر پرایمینگ بر روی سه رقم گلرنگ تحت سه رژیم آبیاری انجام گرفت. برخی از مطالعات اثرات سودمند پرایمینگ بذر را بر روی گیاهان مختلف بررسی کرده اند اما در حال حاضر اطلاعات کمی در مورد خصوصیات مربوط به جوانه زنی، مراحل نموی، عملکرد و خصوصیات کمی و کیفی بذور تیمار شده ژنوتیپ های م...

Computational study on the effects of exhaust gas recirculation on thermal and emission characteristics of HCCI diesel engine

In this paper, a computational in-cylinder analysis of HCCI diesel engine was carried out using IC Engine FORTE (ANSYS 18.2) software package. The analysis used pre-defined industry standard CHEMKIN format for specifying a chemical reaction mechanism during the combustion duration. The investigation was carried out for the effects of various EGR mass percentages on the thermal and emission char...

متن کامل

Real-Time Combustion Parameters Estimation for HCCI-Diesel Engine Based on Knock Sensor Measurement

Future internal combustion engine technologies require an accurate combustion monitoring and control. This can be performed through high frequency recordings of cylinder pressure. However, this solution is limited by the sensor cost and reliability. Another method consist in reconstructing combustion related variables from indirect measurements. In this paper, we propose a combustion indicator ...

متن کامل

A Computational Study of the Effects of Combustion Chamber Geometries on Combustion Process and Emission in a DI Diesel Engine

A computational study aiming to investigate the effect of combustion chamber geometry on combustion process and emission has been carried out in a direct injection diesel engine. The combustion process and emission of three different combustion chamber geometries were considered, and combustion process behaviors such as variation of mean pressure, velocity, heat release rate, emission productio...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: AIP Advances

سال: 2022

ISSN: ['2158-3226']

DOI: https://doi.org/10.1063/5.0085862