Effect of Austenitizing Treatment Followed by Slow Cooling on Graphitization in Hypo-Eutectoid Alloy Steels
نویسندگان
چکیده
منابع مشابه
the washback effect of discretepoint vs. integrative tests on the retention of content in knowledge tests
در این پایان نامه تاثیر دو نوع تست جزیی نگر و کلی نگر بر به یادسپاری محتوا ارزیابی شده که نتایج نشان دهندهکارایی تستهای کلی نگر بیشتر از سایر آزمونها است
15 صفحه اولEffect of Slow Cooling in Reducing Pore Size in a Sintered Powder Metallurgical 6061Aluminium Alloy
The usage of powder metallurgy aluminium compacts in lieu of ferrous components in automotives helps to lower vehicle weight. The major drawback in the commercially available press sintered aluminium alloy is porosity which is mainly dependent on the powder metallurgical process parameters such as compaction pressure, sintering temperature and cooling rate after sintering. In this paper the eff...
متن کاملEffect of Pre - Heat - Treatment on Kinetics of Graphitization
it to 680•Ž in flowing nitrogen (PV-7). Four samples having different pre-heat-treatment conditions were selected; the original coke PV-7 , the second one prepared from PV-7 by the heat treatment at 1500•Ž for 60 min (PV-15) , the third also from PV-7 by the treatment at 2060•Ž for 60 min (PV-7-20) , and the fourth by the heat treatment of PV-15 at 2060•Ž for 60 min (PV-15-20). Each sample was ...
متن کاملthe effect of e-64 on the developmental competence of sheep cocs during in vitro maturation
in the present study, the effect of e-64 at different concentrations (0.5, 1, 5 and 10 µm) added to (1) the ivm medium on oocyte nuclear maturation and developmental competence of ovine oocytes, and (2) to the ivc medium on embryonic development of ovine embryos were investigated.
Strong Bainitic Steels by Continuous Cooling Transformation
Using metallurgical models, three steels were designed to obtain carbide-free bainitic structures in the as-rolled condition. Experimental castings were hot-rolled in a pilot mill and their austenite decomposition kinetics were measured using dilatometry. Tensile and Charpy impact properties were measured and the microstructures were characterised using X-ray diffractometry, optical and scannin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1987
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.51.6_518