Eddy Current Pulsed Thermography with Different Excitation Configurations for Metallic Material and Defect Characterization
نویسندگان
چکیده
منابع مشابه
Eddy Current Pulsed Thermography with Different Excitation Configurations for Metallic Material and Defect Characterization
This paper reviews recent developments of eddy current pulsed thermography (ECPT) for material characterization and nondestructive evaluation (NDE). Due to the fact that line-coil-based ECPT, with the limitation of non-uniform heating and a restricted view, is not suitable for complex geometry structures evaluation, Helmholtz coils and ferrite-yoke-based excitation configurations of ECPT are pr...
متن کاملStress Measurement Using Pulsed Eddy Current Thermography
This paper reports a noncontact inspection method, using Pulsed Eddy Current (PEC) stimulated thermography, for the evaluation of the anisotropic dependency of electrical conductivity of steel exposed to tensile stress. This method combines microscope lens based thermography with PEC using a rectangular excitation coil, giving directional excitation, to infer the electromagnetic properties vari...
متن کاملAdvantages and Applications of Eddy Current Thermography Testing for Comprehensive and Reliable Defect Assessment
Eddy current thermography testing is an emerging technology in nondestructive testing. This technology combines eddy current and thermographic NDT techniques to provide a fast and efficient method for defect detection and characterisation over a relatively large area. The technique uses induced eddy currents to heat the sample being tested and defect detection is based on the changes of the ind...
متن کاملSignal Reconstruction and Feature Extraction of Pulsed Eddy Current Thermography for Aerospace Composites
Pulsed eddy current (PEC) stimulated thermography is proposed as a powerful non-destructive evaluation (NDE) technique, allowing the operator to observe the heating developed from the eddy current distribution in a structure using infrared imaging, detecting defects over a relatively wide area within a short time. Some defects (impact, delamination, disbond or crack) commonly occur in aerospace...
متن کاملStudying piezoelastic and piezomagnetoelastic configurations for different excitation frequencies in MEMS energy harvesters
Typically two configurations are used for energy harvesting with different advantages: piezoelastic and piezomagnetoelastic. Best performance of the piezoelastic configuration is when the excitation frequency is close to the resonance frequency. If the input frequency slightly deviates from the natural frequency, the generated power is severely decreased. To tackle the problem, the piezomagneto...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors
سال: 2016
ISSN: 1424-8220
DOI: 10.3390/s16060843