ECOTOXICITY AND GENOTOXICITY OF STEEL SLAGS: PRELIMINARY RESULTS

Ecotoxicity, Genotoxicity, and Cytotoxicity of Pesticides and Their Degradation Products

Evaluation of Long Term Ageing of Asphalt Mixtures Containing EAF and BOF Steel Slags

This study was conducted in order to evaluate the effects of long term ageing on toughness and resilient modulus of asphalt concrete mixtures containing Electric Arc and Basic Oxygen Furnace steel slags. After initial evaluation of the properties of steel slags using X-ray Diffraction and Scanning Electric Microscope, eleven sets of laboratory mixtures were prepared. Each set was treated replac...

Environmental and Geotechnical Assessment of the Steel Slags as a Material for Road Structure

Slags are the final solid wastes from the steel industry. Their production from waste and associated materials is a proper implementation of the basic objectives and principles of the waste management. This study aims to investigate the chemical and selected significant geotechnical parameters of steel slag as the alternative materials used in road construction. These investigations are strongl...

Hydrothermal Valorization of Steel Slags—Part I: Coupled H2 Production and CO2 Mineral Sequestration

A new process route for the valorization of BOF steel slags combining H2 production and CO2 mineral sequestration is investigated at 300°C (HT) under hydrothermal conditions. A BOF steel slag stored several weeks outdoor on the production site was used as starting material. To serve as a reference, room temperature (RT) carbonation of the same BOF steel slag has been monitored with in situ Rama...

Accelerated Carbonation of Steel Slags Using CO2 Diluted Sources: CO2 Uptakes and Energy Requirements

This work presents the results of carbonation experiments performed on Basic Oxygen Furnace (BOF) steel slag samples employing gas mixtures containing 40 and 10% CO2 vol. simulating the gaseous effluents of gasification and combustion processes respectively, as well as 100% CO2 for comparison purposes. Two routes were tested, the slurry-phase (L/S = 5 l/kg, T = 100°C and Ptot = 10 bar) and the ...